Cellulose ether STD20000S
Product Description
This product is developed to improve the workability of cement- or gypsum-based dry-mix mortars. It can be used in plastering, painting, tile adhesives, and exterior wall insulation systems.
It provides excellent workability, stable air content, and good water retention. The “S” mark indicates surface treatment and a certain degree of solubility.
For even better workability and excellent anti-sagging properties, it can be combined with other additives.
Specification
| Project | Specifications | Analysis Results | |
| Min. | Max. | ||
| Appearance | White to slightly yellow powder or granules | White to slightly yellow powder or granules | |
| Moisture (%) | 0.0 | 8.0 | 3.3 |
| Fineness (%, 0.20mm) | 0.0 | 5.0 | 4.6 |
| Viscosity (mPa.s) (2%, 20°C, NDJ) | 18000 | 30000 | 24520 |
Storage
This product is designed to last for a long time. It is recommended to be used on a first-in, first-out basis. It should be stored in its original packaging in a dry, clean environment, away from heat sources. This product is hydrophilic, and while the packaging can prevent moisture ingress to a certain extent, its moisture content may increase if stored in an unsuitable environment.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Semi-Gloss Powder Coatings | Introduction Our semi-gloss powder coatings are perfect for a wide range of applications, including furniture, appliances, automotive parts, metal... |
 |
Water-based curing agent MT-ultra 307/1 | Characterization Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Hardener for waterborne two-component polyuretha... |
 |
Polyester based powder coating MT-OA110G | Product Description MT-OA110G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
 |
Kitchen supplies powder coating | Introduction Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not ha... |
 |
(FBE) Single Layer Epoxy Anti-Corrosion Powder Coating | Product Usage:Suitable for anti-corrosion of oil and gas transmission pipelines, municipal water supply, drainage, sewage, circulating water, chemi... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
