.

Cellulose ether STD20000S

Product Description

This product is developed to improve the workability of cement- or gypsum-based dry-mix mortars. It can be used in plastering, painting, tile adhesives, and exterior wall insulation systems.

It provides excellent workability, stable air content, and good water retention. The “S” mark indicates surface treatment and a certain degree of solubility.

For even better workability and excellent anti-sagging properties, it can be combined with other additives.

Specification

Project Specifications Analysis Results
Min. Max.
Appearance White to slightly yellow powder or granules White to slightly yellow powder or granules
Moisture (%) 0.0 8.0 3.3
Fineness (%, 0.20mm) 0.0 5.0 4.6
Viscosity (mPa.s) (2%, 20°C, NDJ) 18000 30000 24520

Storage

This product is designed to last for a long time. It is recommended to be used on a first-in, first-out basis. It should be stored in its original packaging in a dry, clean environment, away from heat sources. This product is hydrophilic, and while the packaging can prevent moisture ingress to a certain extent, its moisture content may increase if stored in an unsuitable environment.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Flat surface MT-049/14662
Flat surface MT-049/14662 Introduction No. MT-049/14662 Color Yulong (white) Surface Flat surface System Polyester Scope of application U...
MT-A600 Series Powder Coating
MT-A600 Series Powder Coating Product Overview The Surpass MT-A600 Series powder coating is a high-performance coating designed specifically for computer cases, including deskt...
High temperature-resistant powder coating
High temperature-resistant powder coating Introduction As the application scope of powder coating continues to expand, some extreme environments have put forward higher requirements for po...
ACE Powder Coating
ACE Powder Coating Introduction CategoryDetails Environmental – Zero VOC emissions– Over 95% overspray recyclability Performance &ndash...
Powder Coating Types & Materials-powder coating china
Powder Coating Types & Materials-powder coating china Forget wet paint. Try a dry finish. Powder coatings are excellent choices for that final film of color, texture or protection. According to the Pow...
Все товары поставщика

Похожие товары

Trimellitic anhydride 97%
Trimellitic anhydride 97% Продавец: Yufeng International Group Co., Ltd Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a...
Isobutyric Anhydride CAS 97-72-3
Isobutyric Anhydride CAS 97-72-3 Продавец: Yufeng International Group Co., Ltd Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo...
Isobutyric Acid CAS 79-31-2
Isobutyric Acid CAS 79-31-2 Продавец: Yufeng International Group Co., Ltd Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met...
2-Amino-2-methyl-1-propanol(AMP)CAS:124-68-5
2-Amino-2-methyl-1-propanol(AMP)CAS:124-68-5 Продавец: Yufeng International Group Co., Ltd AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and...
Dimethyl sulfoxide (DMSO) CAS: 67-68-5
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 Продавец: Yufeng International Group Co., Ltd Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture...