Polyester based powder coatings MT-600 AM
Product Description
MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environment, offering the benefits of MT- 600 in combination with specific antimicrobial activity. MT- 600 AM powders are available in a wide range of colours in gloss, satin, matt, metallic and textured effects and can be custom matched to the user’s requirements.
Powder Properties
| Chemical type | Polyester – TGIC |
| Particle Size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.8 g/cm³ depending on colour |
| Color | Grey |
| Storage | Dry cool conditions below 25°C (open boxes must be resealed) |
| Shelf life | 12 months |
| Stoving schedule (object temperature) | 15 minutes at 190°C
10 minutes at 200°C 8 minutes at 210°C |
Mechanical Tests
| Flexibility | ISO 6860 (Conical Mandrel) | Pass 3 mm |
| Adhesion | ISO 2409 (2mm Crosshatch) | Gt 0 |
| Erichsen Cupping | ISO 1520 | Pass 7 mm |
| Hardness | ISO 1518 (2000g) | Pass – no penetration to substrate |
| Impact | ISO 6272 | 50 kgcm |
Chemical and Durability Tests
| Salt Spray | ISO 7253 (250 hours) | Pass – no corrosion creep more than 2mm from scribe |
| Cyclic Humidity | ISO 6270-1 (1000 hours) | Pass – no blistering or loss of gloss |
| Distilled Water Immersion | ISO 2812 (240 hours) | Pass – no blistering or loss of gloss |
| Exterior Durability | Excellent – non chalking, slight loss of gloss after 12 months continuous exposure but no film breakdown or reduction in protective properties | |
| Chemical Resistance | Generally excellent resistance to most acids, alkalis and oils at normal temperatures | |
| Colour Stability at Elevated temperatures | Excellent for continuous exposure up to 150°C. | |
Pre-treatment
Aluminium, steel or Zintec surfaces to be coated must be clean and free from grease. Iron phosphate and particularly lightweight zinc phosphating of ferrous metals improves corrosion resistance. Aluminium substrates may require a chromate conversion coating.
Application
MT-600 AM powders can be applied by manual or automatic electrostatic spray equipment. Unused powder can be reclaimed using suitable equipment and recycled through the coating system.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Titanium dioxide STD-2589 | Introduction： STD-2589 is an economical rutile titanium dioxide product manufactured using the sulfuric acid process. It is an uncoated and organi... |
 |
Powdfr Coating For General Industrial Use | Characteristics of powder coatings ”It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic,”... |
|
|
Bonding Metallic Powder Coating | Advantage (Compare with normal metallic powder ): 1.The metallic pigment can be better melt with bottom powder, which will not jam the spray gun w... |
 |
Flat Metallic Powder Coating | Introduction： Brand： STD Color RAL Color、Customizable Surface Flat metal System Polyester Scope of application Used... |
 |
Flame retardant insulation powder coating | Brief description: Flame retardant insulation pressure-resistant powder coating made of pure epoxy resin, through the dipping process, the film th... |
