Polyurethane primer STD-927
Product Description
The one-component primer can improve the surface condition of the base layer, making it flatter and smoother, providing a good foundation for the application of waterproof coatings. At the same time, the primer can also be more compatible with the waterproof coating and enhance the overall performance of the waterproof layer.
One-component primers usually contain special resin ingredients that can penetrate into the tiny pores of the base material to form a mechanical anchoring effect, thereby greatly enhancing the bonding strength between the waterproof coating and the base.
Typical performance
| Viscosity (25℃) pa.s | 2~9 |
| NCO | 8~15 |
| Coating impermeability | 04Mpa,2min |
| Bond tensile strength | ≥2.3 |
| Heat resistance | 100℃.5h coating |
| Corrosion resistance (48h) | 40% sulfuric acid 25% hydrochloric acid 40% sodium hydroxide |
Features
Improve waterproof layer performance
Enhance the adhesion of the base
Application
Using a one-component primer before applying waterproof coatings can make the waterproof coating more evenly distributed on the surface of the base layer, forming a waterproof layer with consistent thickness and continuity, thus improving the waterproof effect and durability of the waterproof layer. For example, in roof waterproofing projects, after using a one-component primer to treat the base layer, the waterproof layer’s anti-seepage and anti-aging properties can be significantly improved.
This strong bond ensures that the waterproof layer is not easy to fall off when subjected to external forces (such as slight deformation of the base layer, stress caused by temperature changes, etc.), maintaining the integrity of the waterproof system. For example, after applying a single-component primer on a concrete base layer, the resin in the primer will fill the pores on the concrete surface, allowing the waterproof coating to better adhere to the base layer, avoiding problems such as hollowing and peeling in the later stage.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Gray Color Hammer Powder Coating | Surface Finish Options Overview Basic Info. iteminformation Model NO. Hammer Tone Finish Powder Coating Method Spray Mai... |
 |
Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
 |
Blue flash silver color powder coating | COLORS AVAILABLE RAL colors coating powder Pantone colors Color-matching regarding customer requirement is available GENERAL TYPES Polyester /... |
 |
Dicyandiamide CASAMID DMPF | Description CASAMID DMPF is agrade of dicyandiamide,ground to a very fine particle size, for use in epoxy resin-based powder coatings and contains... |
 |
Epoxy/Polyester Powder Coatings | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical resistance -Better heat resistance and light resi... |
Same products
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Seller: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | Seller: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
