ARO powder for jacking pipe
Introduction
Specially used for external protective coating of jacking pipe construction, it can also be applied on FBE coating to improve the wear resistance and impact resistance of FBE external coated steel pipe. It has the excellent adhesion and cathodic stripping resistance of single-layer FBE coating and the ultra-high hardness and ultra-high wear resistance of double-layer FBE coating.
The coating complies with SY/T 0315-2013 and GB/T39636-2020 standards.
- According to different design requirements, the thickness of one coating can reach 800-1000µm for ordinary grade and ≥1500µm for reinforced grade.
- It does not need to be used with any coating, and can be used alone as the outer protective layer of the steel jacking pipe.
- The extremely low surface friction coefficient reduces the resistance of jacking construction.
- It still has high flexibility (-30℃, 30 bending without cracking) at high coating thickness (1000µm).
- Cathode stripping (-1.5V, 65℃, 48h) ≤5mm.
- Abrasion resistance (1000g/1000r, CS-17) ≤50mg; or sand fall abrasion resistance (L/µm) ≥3L.
- Adhesion (pulling method) ≥20MPa.
- The thickness of one-time curing coating can exceed 1500µm.
- The maximum operating temperature can reach 90℃.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Powder coating for automobile wheels MT-Al00 | Product Overview: Special powder coating for wheels (rims), a series of epoxy polyester powder coating products specially designed for the charact... |
 |
Polyester based powder coatings MT-600 AM | Product Description MT-600 AM is a series of polyester based powder coatings, formulated with the use of TGIC, designed for the exterior environme... |
 |
Butter inhibitor STD-5 | Butter inhibitor STD-5 has the functions of anti-oxidation, metal ion passivation, polymerization inhibition, purification and dispersion. This ad... |
|
|
Fluoropolymer (FEVE or PVF3) Powder Coatings MT-D3020 | Product description MT-D3020 is a series of hyperdurable powder coatings designed to meet the most demanding architectural specification requireme... |
 |
Matte powder coating | Introduction Matte powder coating is a specialized type of coating that provides a non-reflective, low-gloss finish. It is applied as a dry powder... |
Same products
 |
Trimellitic anhydride 97% | Seller: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | Seller: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | Seller: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | Seller: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | Seller: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
