Pure polyester transparent powder coating
Product Description
This series of products is made of polyester resin and hardener, and is made of high transparency materials.
Product Features
Excellent gloss and vividness, the coating is crystal clear;
High transparency and image clarity, accurately reflecting the base color;
Excellent leveling, highly smooth coating surface;
Long-term durability in harsh outdoor environments, maintaining the original color of the coating;
Good matching with a variety of paints and color powder coatings.
Application Areas
1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;
2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;
3. Suitable as a finishing protective layer for metal powder coatings
Transportation Packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.2~1.8g/cm |
| Particle size | Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stability | Polyester powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: between 40 and 150 microns, depending on the application requirements. | ||
| Curing conditions | Recommended 200℃/10 minutes, can also be designed according to user needs: 160℃/20 minutes, 180℃/10 minutes | |
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
|
|
Epoxy powder coatings MT-100 | Product description MT-100 is a series epoxy based powder coatings that exhibit excellent corrosion protection and chemical resistance when applie... |
|
|
Chlorinated Polyether Powder Coatings | Introduction We manufacture and supply high-performance Chlorinated Polyether (CPE) powder coatings directly from China, serving global B2B client... |
 |
Flame retardant insulation powder coating | Brief description: Flame retardant insulation pressure-resistant powder coating made of pure epoxy resin, through the dipping process, the film th... |
|
|
Metallic flat matte MT-039/98992 | Introduction No. MT-039/98992 Color Metallic silver Surface Metallic flat matte System Weather-resistant polyester ... |
|
|
High Transfer Efficiency (HTE) Powder | Introduction With exceptional adhesion and strength, HTE powder coatings are engineered to electrostatically wrap around and penetrate deep recess... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | Seller: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
