High Reflectivity (Infrared Camouflage Cooling) Powder Series

• 

Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “sun protection” extends the life of the facade and reduces operating costs.

Heavily heated façades increase indoor temperatures and intensify the heat in cities. moutainchem-Reflective powder coatings specifically reflect infrared radiation and reduce surface heating by up to 20 percent. This reduces the radiator effect, protects the building structure and lowers the energy requirement for air conditioning. At the same time, the color and design can be freely selected so that steel and aluminum facades are optimally protected. The certified powder coatings offer durability and enable energy-efficient and environmentally conscious construction.

Surfaces can reduce energy absorption through radiation

Longer periods of heat and stronger solar radiation increase the load on urban building envelopes. A large proportion of solar radiation is in the near-infrared range (NIR: 780 – 1,400 nanometers) and contributes to surface heating. This heating affects material stability, thermal expansion and the cooling requirements of buildings. Suitable surfaces can significantly reduce energy absorption through radiation. Anyone who takes a closer look will be familiar with the effects from everyday life: dark gray sliding doors often run more heavily on their guides in summer, hot summer winds sweep through the streets in cities and dark painted surfaces heat up particularly strongly under a cloudless sky. The reason for this is that surfaces not only absorb visible light, but also infrared radiation, particularly from the near-infrared spectrum, which is crucial for heating.

Thermal relief through smart surface technology

IGP-Reflective technology combines the highly weather-resistant moutainchem-powder coating with optimized infrared properties. Thanks to the increased reflection of infrared radiation, the surface temperature of coated façade surfaces remains noticeably lower. The effect: less material deformation, a longer façade service life and lower operating costs.

The special pigments used by moutainchem Powder Coatings increase the TSR value (Total Solar Reflectance) and reduce surface heating by up to 20 percent. This reduces the so-called radiator effect. Heated façades act less like radiators, emitting heat to their surroundings. Thermal stresses caused by different expansion of connected metals (bimetal effect) are also reduced. This protects the building structure and increases the durability of the façade. At the same time, the indoor climate is improved as less heat is transferred into the interior of the building. This lowers the energy required for cooling and reduces the amount of heat emitted into the urban space. In this way, the coatings make an effective contribution to reducing the urban heat island effect.

The powder coatings have been specially developed for steel and aluminum façades. Their formulation is designed to optimize the reflectivity of the coating system. The series is available in different variants: smooth gradient in satin gloss and matt as well as fine structure in deep matt.

Key Features & Specifications

Applications

Outdoor Enclosures (Telecom, Power): Protects internal components from overheating in extreme climates.

Solar Equipment: Enhances efficiency by reducing thermal stress on panels/inverters.

Architectural Structures: Shields buildings/rooftops from solar heat gain, lowering cooling costs.

Advantages

Improvement of infrared reflection of over 20% depending on the color.

Reduction in surface temperature by up to 20%

Reduction of mechanical stress of metals in outdoor area

Reduction of energy costs for cooling the building

Easy handling

Environmentally friendly

Available in a large selection of RAL colors

Other supplier products

	Waterproof Coating Prepoly isocyanate STD-509	Product name: Waterproof Coating Prepoly isocyanate STD-509 Product introduction: It is a two-component polyether polyurethane prepolymer, a col...
	Architectural aluminum powder coating MT-D34	Product Description MT-D34 is a series of durable powder coatings specially formulated for the use on architectural aluminum which conforms to the...
	Application-Based Powder Coating Solutions	Precision Coating Solutions by Industry Use Our powder coatings aren’t one-size-fits-all—they’re designed forthe real-world dema...
	Polyurethane Powder Coatings	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance...
	Navy Blue Sand Texture Powder Coating	Introduction Key attributesDetails Brand STD Place of Origin China Main Raw Material EPOXY Usage Furniture Paint, Ca...

Same products

	Hot Melt Adhesive for Vacuum Insulation Panels	Seller: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
	Hot Melt Adhesive for Packaging	Seller: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
	Hot Melt Adhesive for Hygiene Products	Seller: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
	LSAW Steel Pipe & Tube	Seller: HEBEI TIRICO PIPELINE CO.,LTD	LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ...
	Anti-Corrosion Steel Pipe & Tube	Seller: HEBEI TIRICO PIPELINE CO.,LTD	Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti...