High Reflectivity (Infrared Camouflage Cooling) Powder Series

Powder coatings that reflect infrared radiation reduce the surface temperature of building facades by up to 20 percent. This “sun protection” extends the life of the facade and reduces operating costs.

Heavily heated façades increase indoor temperatures and intensify the heat in cities. moutainchem-Reflective powder coatings specifically reflect infrared radiation and reduce surface heating by up to 20 percent. This reduces the radiator effect, protects the building structure and lowers the energy requirement for air conditioning. At the same time, the color and design can be freely selected so that steel and aluminum facades are optimally protected. The certified powder coatings offer durability and enable energy-efficient and environmentally conscious construction.

Surfaces can reduce energy absorption through radiation

Longer periods of heat and stronger solar radiation increase the load on urban building envelopes. A large proportion of solar radiation is in the near-infrared range (NIR: 780 – 1,400 nanometers) and contributes to surface heating. This heating affects material stability, thermal expansion and the cooling requirements of buildings. Suitable surfaces can significantly reduce energy absorption through radiation. Anyone who takes a closer look will be familiar with the effects from everyday life: dark gray sliding doors often run more heavily on their guides in summer, hot summer winds sweep through the streets in cities and dark painted surfaces heat up particularly strongly under a cloudless sky. The reason for this is that surfaces not only absorb visible light, but also infrared radiation, particularly from the near-infrared spectrum, which is crucial for heating.

Thermal relief through smart surface technology

IGP-Reflective technology combines the highly weather-resistant moutainchem-powder coating with optimized infrared properties. Thanks to the increased reflection of infrared radiation, the surface temperature of coated façade surfaces remains noticeably lower. The effect: less material deformation, a longer façade service life and lower operating costs.

The special pigments used by moutainchem Powder Coatings increase the TSR value (Total Solar Reflectance) and reduce surface heating by up to 20 percent. This reduces the so-called radiator effect. Heated façades act less like radiators, emitting heat to their surroundings. Thermal stresses caused by different expansion of connected metals (bimetal effect) are also reduced. This protects the building structure and increases the durability of the façade. At the same time, the indoor climate is improved as less heat is transferred into the interior of the building. This lowers the energy required for cooling and reduces the amount of heat emitted into the urban space. In this way, the coatings make an effective contribution to reducing the urban heat island effect.

The powder coatings have been specially developed for steel and aluminum façades. Their formulation is designed to optimize the reflectivity of the coating system. The series is available in different variants: smooth gradient in satin gloss and matt as well as fine structure in deep matt.

Key Features & Specifications

Feature	Specification / Benefit
Reflective Cooling Effect	Reflects >90% of solar infrared radiation (800–2500 nm), reducing heat absorption.
Temperature Regulation	Maintains internal workpiece temperature≤5°C above ambientunder direct sunlight.
UV/Weather Resistance	Withstands1500H xenon lamp aging (ISO 4892-2)and500H salt spray (ISO 9227)for long-term outdoor durability.
Environmental Adaptability	Ideal for high-UV, high-heat, and high-humidity environments (e.g., deserts, coastal regions).

Applications

Outdoor Enclosures (Telecom, Power): Protects internal components from overheating in extreme climates.

Solar Equipment: Enhances efficiency by reducing thermal stress on panels/inverters.

Architectural Structures: Shields buildings/rooftops from solar heat gain, lowering cooling costs.

Advantages

Improvement of infrared reflection of over 20% depending on the color.

Reduction in surface temperature by up to 20%

Reduction of mechanical stress of metals in outdoor area

Reduction of energy costs for cooling the building

Easy handling

Environmentally friendly

Available in a large selection of RAL colors

Other supplier products

	Metal bonding powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder according t...
	Automotive original powder coatings	1. Market Shift: Driven by Environmental Compliance Under China’s “Dual Carbon” policy and global sustainability trends, automot...
	Powder Coating For Imitation Wood Grain	With the improvement of people’s environmental awareness, coating applications are becoming increasingly popular, especially art textured pow...
	Road Barrier Powder Coating	Introduction Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista...
	Beige Matte Powder Coating	Surface Finish Options Overview Details Powder type Epoxy-Polyester, Polyester Applications Exterior Industrial, Specialized Finish type S...

供应产品

Same products

	Epimedium Extract	卖方: Fruit Powder,Vegetable Powder	Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
	Pumpkin Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
	Broccoli Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
	Pomegranate Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...
	Orange Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Orange PowderLatin Name: Citrus sinensisUsed Part: Fruit juiceAppearance: Light yel...