Imitation porcelain light luxury home decoration powder
Introduction
This series of products adopts the new super-leveling technology. The product has the surface effect of anti-porcelain swimming, soft gloss, smooth surface, delicate and smooth feel, and excellent impact performance. The product is rich in color, not only can provide a highly decorative coating appearance, but also give people a comfortable imitation skin feel. It can be applied to various indoor and outdoor fields such as doors and windows, furniture, hardware, aluminum profiles, etc., making the living environment more elegant and noble.
Scope of application:
High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc.
Surface effect of anti-porcelain swimming coating
The surface of the coating is delicate and smooth, and the feel is smooth
Excellent adhesion through 50kg.cm positive and negative impact
Green and environmentally friendly, reducing costs
Guide to use
Curing conditions:
210℃/12min; In order to make the coating of the coated object cure evenly and the gloss stable, it is best to use an oven with uniform temperature distribution and a faster heating rate; and reasonably control the curing temperature and time according to the situation of the workpiece.
Pretreatment:
The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007. The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡. The time interval between chemical conversion pretreatment and coating should not exceed 16 hours. In principle, coating should be applied immediately after the conversion treatment is dry.
Workpiece hanging:
When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing and affecting the surface effect of the coating.
Powder spraying:
Choose reasonable process parameters, control the voltage, air pressure and powder output. The powder spraying environment should preferably have a temperature and humidity control system. The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.
The recommended coating thickness is 50-80um, otherwise it will affect the coating performance.
During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.
Send product request
Other supplier products
 |
Polyester/TGIC Powder Coatings | Feature: -Good bond ability and good mechanical properties -Good overbaking resistance -Excellent weatherability -Good flowing and glossy Fiel... |
 |
Sand grain metal MT-049/77578 | Introduction No. MT-049/77578 Color Xuanyou (grey) Surface Sand grain metal System Polyester Scope of applicatio... |
 |
Soft Coral Gold powder coating/the powder coating company | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
 |
Polyurethane Powder Coatings | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance... |
 |
Flame retardant insulation powder coating | Brief description: Flame retardant insulation pressure-resistant powder coating made of pure epoxy resin, through the dipping process, the film th... |
Same products
 |
Wholesale L-Cystine dihydrochloride | Seller: 846340 | L‑Cystine dihydrochloride = (L‑cystine)·2HCl 1. Basic Identification Molecular formu... |
 |
L-Cystine dihydrochloride Manufacturer | Seller: 846340 | Chemical Structure L‑cystine is formed by oxidative dimerization of two L‑cysteine molecules v... |
 |
L-Cystine dihydrochloride Supplier | Seller: 846340 | L-cysteine is a sulfur-containing non-essential amino acid, being the dimeric form of L-cysteine.... |
 |
L-Cystine dihydrochloride powder | Seller: 846340 | Main Applications ofL-Cystine dihydrochloride Cell Culture Media Essential supplement... |
 |
L-Cystine dihydrochloride 30925-07-6 | Seller: 846340 | Key Properties & Advantages ofL-Cystine dihydrochloride Solubility Boost Free L‑c... |
