Pure polyester transparent powder coating
Product Description
This series of products is made of polyester resin and hardener, and is made of high transparency materials.
Product Features
Excellent gloss and vividness, the coating is crystal clear;
High transparency and image clarity, accurately reflecting the base color;
Excellent leveling, highly smooth coating surface;
Long-term durability in harsh outdoor environments, maintaining the original color of the coating;
Good matching with a variety of paints and color powder coatings.
Application Areas
1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;
2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;
3. Suitable as a finishing protective layer for metal powder coatings
Transportation Packaging
Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.
Hygiene and safety
Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.
Powder properties
| Specific gravity | 1.2~1.8g/cm |
| Particle size | Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%. |
| Storage stability | Polyester powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used. |
Coating properties
| Test items | Inspection standard or method | Inspection index |
| Appearance | Visual inspection | Various board surface effects |
| Impact | GB/T 1732 | ≥50Kg·cm |
| Bending | GB/T 6742 | ≤2mm |
| Cupping | GB/T 9753 | ≥8mm |
| Hardness | GB/T 6739 | ≥H~2H |
| Adhesion | GB/T 9286 | Level 0 |
| Neutral salt spray resistance | GB/T 1771 | 500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality |
| Moisture and heat resistance | GB/T 1740 | 500h No abnormality |
| Artificial weather aging resistance | GB/T 1865 | 800h; Discoloration ≤2 level; Gloss loss ≤2 level |
| The above coating performance indicators may decrease slightly as the gloss decreases. | ||
| Spraying | This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating. | |
| Coating thickness: between 40 and 150 microns, depending on the application requirements. | ||
| Curing conditions | Recommended 200℃/10 minutes, can also be designed according to user needs: 160℃/20 minutes, 180℃/10 minutes | |
Send product request
Other supplier products
 |
Broad Desert Saddle Brown powder coating | Introduction Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to t... |
 |
3-Layer Polyethylene (FPE) Anti-Corrosion Epoxy Powder Coating/advanced powder coating | Product Introduction:This product is formulated using epoxy resin and phenolic epoxy resin, designed and manufactured according to GB/T 23257-2009.... |
 |
Dark Green Sand Texture Powder Coating | Key Attributes ItemsInformation CAS No. 53808-41-6 Place of Origin China Main Raw Material EPOXY Usage Furniture Pai... |
 |
Insulating Powder Coating | Product Features: High electrical insulation properties, with a large resistance coefficient and low dielectric constant, meeting the requirements... |
 |
Furniture Powder Coatings | Introduction We are a leading Chinese powder coating factory with over 20 years of export experience, supplying high-quality coatings to furniture... |
Same products
 |
Heat Sealing Sterilization Pouch | Seller: Hopeway AMD | Heat Sealing Sterilization Pouch is designed for secure medical instrument packaging, supporting ... |
 |
Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier | Seller: Trucont LLC | At Trucont LLC, we have ongoing Catalytic converter scrap available for immediate loading and shi... |
 |
Epimedium Extract | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ... |
 |
Pumpkin Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ... |
 |
Broccoli Powder | Seller: Xi'an Yuensun Biological Technology Co., Ltd. | Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who... |
