Pure polyester transparent powder coating

Product Description

This series of products is made of polyester resin and hardener, and is made of high transparency materials.

Product Features

Excellent gloss and vividness, the coating is crystal clear;

High transparency and image clarity, accurately reflecting the base color;

Excellent leveling, highly smooth coating surface;

Long-term durability in harsh outdoor environments, maintaining the original color of the coating;

Good matching with a variety of paints and color powder coatings.

Application Areas

1. Designed for surface finishing of die-cast aluminum wheels, with ultra-high transparency and standard transparency;

2. Suitable as a high-performance finishing coating for various metal appliances, such as furniture metal tripods, bicycles, locks, door handles;

3. Suitable as a finishing protective layer for metal powder coatings

Transportation Packaging

Carton packaging, lined with two layers of polyvinyl chloride plastic bags, net weight of each box 20kg. Non-hazardous items can be transported in various ways, but should be kept away from direct sunlight, moisture and heat, and contact with chemicals.

Hygiene and safety

Operators should wear anti-sit masks during use to avoid inhaling dust and minimize long-term contact between skin and powder coating. Paint attached to the skin can be washed with soap.

Powder properties

Specific gravity	1.2~1.8g/cm
Particle size	Depending on the application, the standard type has an average particle size of 35~40 microns, less than 10 microns of powder <10%, more than 100 microns of powder <0.5%.
Storage stability	Polyester powder coatings should be stored in a dry, ventilated room below 35°C, and avoid direct sunlight. If stored in an air-conditioned room, the powder must be stored at room temperature or the same (temperature) as the spraying equipment before use to avoid moisture. Under this condition, the powder can be stably stored for more than 12 months. If it is exceeded, it must be re-tested. If the result meets the requirements, it can still be used.

Coating properties

Test items	Inspection standard or method	Inspection index
Appearance	Visual inspection	Various board surface effects
Impact	GB/T 1732	≥50Kg·cm
Bending	GB/T 6742	≤2mm
Cupping	GB/T 9753	≥8mm
Hardness	GB/T 6739	≥H~2H
Adhesion	GB/T 9286	Level 0
Neutral salt spray resistance	GB/T 1771	500h; Scribed area: unidirectional rust ≤2.0mm; Unscribed area: no abnormality
Moisture and heat resistance	GB/T 1740	500h No abnormality
Artificial weather aging resistance	GB/T 1865	800h; Discoloration ≤2 level; Gloss loss ≤2 level
The above coating performance indicators may decrease slightly as the gloss decreases.
Spraying	This series of products can be suitable for the following spraying methods: corona electrostatic spraying; friction electrostatic spraying; electrostatic fluidized bed spraying; fluidized bed hot dip coating.
	Coating thickness: between 40 and 150 microns, depending on the application requirements.
Curing conditions	Recommended 200℃/10 minutes, can also be designed according to user needs: 160℃/20 minutes, 180℃/10 minutes

Other supplier products

	(FBE) Single Layer Epoxy Anti-Corrosion Powder Coating	Product Usage:Suitable for anti-corrosion of oil and gas transmission pipelines, municipal water supply, drainage, sewage, circulating water, chemi...
	Powder coating for fitness equipment	Product description Powder coating for fitness equipment has an excellent decorative appearance, and the coating film has excellent corrosion resi...
	Outdoor powder coatings/powder coating material	Introduction Outdoor powder coatings are advanced protective and decorative coatings designed for long-lasting performance. Applied as a dry powde...
	Powder coating series for vehicle compartment	Introduction With the development of environmental protection and energy conservation, the central environmental protection department and local g...
	Frame & chassis powder coatings MT-A400 series	Product Overview: Weather-resistant pure polyester powder coatings designed for frame and chassis parts Coating characteristics: – High co...

供应产品

Same products

	Catalytic Converter Scrap Supplier, Catalytic Converter Scrap for Sale, , Catalytic Converter Scrap, Catalytic Scrap for Sale, Catalytic Scrap Supplier, Scrap Catalytic Supplier	卖方: Trucont LLC	Trucont LLC 持续供应催化转化器废料，可立即装运发货。我们为全球各地的回收公司、金属加工商、汽车回收商、废料贸易商和买家提供优质的催化转化器废料。我们的催化转化器废料经过精心收集、分类...
	Epimedium Extract	卖方: Fruit Powder,Vegetable Powder	Product Name: Epimedium ExtractLatin Name: Epimedium Sagittatum Maxim.Specification: Icariin 5%, ...
	Pumpkin Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Pumpkin PowderLatin Name: Cucurbita pepo L.Used Part: FruitAppearance: yellow fine ...
	Broccoli Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Broccoli powder Latin Name: Brassica oleracea L.var.italic Planch. Used Part: Who...
	Pomegranate Powder	卖方: Fruit Powder,Vegetable Powder	Product Name: Pomegranate PowderLatin Name: Punica granatum linn.Used Part: Fruit juiceAppearance...