Imitation porcelain light luxury home decoration powder
Scope of application:
High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc.
Surface effect of anti-porcelain swimming coating
The surface of the coating is delicate and smooth, and the feel is smooth
Excellent adhesion through 50kg.cm positive and negative impact
Green and environmentally friendly, reducing costs
Guide to use
Curing conditions:
210℃/12min; In order to make the coating of the coated object cure evenly and the gloss stable, it is best to use an oven with uniform temperature distribution and a faster heating rate; and reasonably control the curing temperature and time according to the situation of the workpiece.
Pretreatment:
The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007. The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡. The time interval between chemical conversion pretreatment and coating should not exceed 16 hours. In principle, coating should be applied immediately after the conversion treatment is dry.
Workpiece hanging:
When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing and affecting the surface effect of the coating.
Powder spraying:
Choose reasonable process parameters, control the voltage, air pressure and powder output. The powder spraying environment should preferably have a temperature and humidity control system. The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.
The recommended coating thickness is 50-80um, otherwise it will affect the coating performance.
During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.
Performance index
| Applicable surface | Item | Test standard | Index |
|---|---|---|---|
| Powder performance | State in container | HG/T2006-2006 | Uniform color, no foreign matter, loose powder |
| Sieve residue (125μm) | HG/T2006-2006 | All passed | |
| Appearance of coating | Adhesion | GB/T9286 | Grade 0 |
| Impact resistance | GB/T1173 | Punch diameter: 16±0.3mm; pit depth 2.5±0.3mm, no peeling after tape pull test | |
| Anti-cupping | GB/T 9753 | 5mm | |
| Bending resistance | GB/T 6742 | 5mm No peeling after tape pull test | |
| Chemical properties of coating | Boiling water resistance | GB5237.4 | No shedding or wrinkling |
| Solvent resistance | GB5237.4 | Grade 3 | |
| Salt spray resistance | GB/T10125 | 1000h, scribe line: unidirectional rust ≤4mm | |
| Moisture and heat resistance | GB/T1740 | 1000h, no blistering, shedding or other obvious changes | |
| Coating weather resistance | Accelerated weather resistance | GB/T1865 | Xenon lamp 800h, △E≤5. gloss retention>50% |
| Natural weather resistance | GB/T9276 | Negotiated |
Remarks: The accelerated aging requirements for bright color coatings such as black, yellow, and orange shall be agreed upon by both the supplier and the buyer and shall be stated in the contract.
Send product request
Other supplier products
 |
Metallic plane MT-049/94459 | Introduction No. MT-049/94459 Color Green Surface Metallic plane System Resin imported from Austria Packing Spec... |
 |
Metallic sand texture matte MT-049/7C000 | Introduction No. MT-049/7C000 Color Gray Surface Metallic sand texture matte System Polyester Scope of applicati... |
 |
Functional Material Powder Coatings | Introduction 1. Targeted Solutions for Industrial Challenges Functional powder coatings address industry-specific needs where traditional coating... |
 |
Green Powder Coating Solutions/powder coating powders | We deliver a wide range of green series powder coatings manufactured in China and trusted by global industrial buyers. Why Our Green Powder Coatin... |
 |
Polyvinyl acetate powder coating | Brief description It is made of German and multi-head trees and chemicals such as TGIC or HAA. Features Excellent mechanical properties and exce... |
Same products
 |
Trimellitic anhydride 97% | Seller: Yufeng International Group Co., Ltd | Trimellitic anhydrideis a 2-benzofuran compound having oxo groups at the 1- and 3-positions and a... |
 |
Isobutyric Anhydride CAS 97-72-3 | Seller: Yufeng International Group Co., Ltd | Product Name: Isobutyric Anhydride CAS No.: 97-72-3 Purity: 99% Molecular Formula: C6H10O3 Mo... |
 |
Isobutyric Acid CAS 79-31-2 | Seller: Yufeng International Group Co., Ltd | Product Name:ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Met... |
 |
2-Amino-2-methyl-1-propanol（AMP）CAS：124-68-5 | Seller: Yufeng International Group Co., Ltd | AtYufeng, a trusted 2-Amino-2-methyl-1-propanol Factory & Supplier, we prioritize quality and... |
 |
Dimethyl sulfoxide (DMSO) CAS: 67-68-5 | Seller: Yufeng International Group Co., Ltd | Yufengis one of the leading dimethyl sulfoxide suppliers and also a professional such manufacture... |
