Imitation porcelain light luxury home decoration powder
Scope of application:
High-end aluminum alloy building profiles, doors and windows, furniture, hardware, etc.
Surface effect of anti-porcelain swimming coating
The surface of the coating is delicate and smooth, and the feel is smooth
Excellent adhesion through 50kg.cm positive and negative impact
Green and environmentally friendly, reducing costs
Guide to use
Curing conditions:
210℃/12min; In order to make the coating of the coated object cure evenly and the gloss stable, it is best to use an oven with uniform temperature distribution and a faster heating rate; and reasonably control the curing temperature and time according to the situation of the workpiece.
Pretreatment:
The workpiece must be pretreated before spraying, and it must comply with the provisions of Chapter 5 of GB/T 8013.3-2007. The mass of the chromate conversion film should be between 0.4 and 1.0 g/㎡. The time interval between chemical conversion pretreatment and coating should not exceed 16 hours. In principle, coating should be applied immediately after the conversion treatment is dry.
Workpiece hanging:
When hanging the workpiece, hang it reasonably according to the shape and thickness of the workpiece to improve the powdering rate and yield; and pay attention to keeping the spraying system and the surrounding environment clean to prevent different brands of powder coatings from mixing and affecting the surface effect of the coating.
Powder spraying:
Choose reasonable process parameters, control the voltage, air pressure and powder output. The powder spraying environment should preferably have a temperature and humidity control system. The optimal powder spraying temperature is 15-25℃, and the relative air humidity of the powder spraying room is preferably 45%-55%; in addition, the proportion of recycled powder should be controlled to ensure the color stability of the product.
The recommended coating thickness is 50-80um, otherwise it will affect the coating performance.
During the film formation process, the color will be slightly affected by process conditions such as temperature and thickness. It is recommended that users conduct tests before use to achieve satisfactory results.
Performance index
| Applicable surface | Item | Test standard | Index |
|---|---|---|---|
| Powder performance | State in container | HG/T2006-2006 | Uniform color, no foreign matter, loose powder |
| Sieve residue (125μm) | HG/T2006-2006 | All passed | |
| Appearance of coating | Adhesion | GB/T9286 | Grade 0 |
| Impact resistance | GB/T1173 | Punch diameter: 16±0.3mm; pit depth 2.5±0.3mm, no peeling after tape pull test | |
| Anti-cupping | GB/T 9753 | 5mm | |
| Bending resistance | GB/T 6742 | 5mm No peeling after tape pull test | |
| Chemical properties of coating | Boiling water resistance | GB5237.4 | No shedding or wrinkling |
| Solvent resistance | GB5237.4 | Grade 3 | |
| Salt spray resistance | GB/T10125 | 1000h, scribe line: unidirectional rust ≤4mm | |
| Moisture and heat resistance | GB/T1740 | 1000h, no blistering, shedding or other obvious changes | |
| Coating weather resistance | Accelerated weather resistance | GB/T1865 | Xenon lamp 800h, △E≤5. gloss retention>50% |
| Natural weather resistance | GB/T9276 | Negotiated |
Remarks: The accelerated aging requirements for bright color coatings such as black, yellow, and orange shall be agreed upon by both the supplier and the buyer and shall be stated in the contract.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Weather-Resistant Powder Coatings | Introduction Product SegmentationApplication Fields General Industrial-Grade Weather-Resistant Powder Agricultural equipment, construc... |
 |
Metallic flat matte MT-049/98402 | Introduction No. MT-049/98402 Color Metallic color Surface Metallic flat matte System Polyester Scope of applica... |
 |
Fitness Equipment Powder | Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and... |
 |
STD 22-5070 PK Pigment blue | Productdescription STD 22-5070 is a blue Cobalt Chromite spinel. It has excellent chemical resistance, outdoor durability, lightfastness, thermal... |
 |
Luggage rack powder coating | Characteristics of powder coatings ”It does not contain toxic, solvent free, or volatile toxic substances, so it does not have toxic”&... |
