Residential Series NF Membrane Element-NF-1812/NF-2012/NF-2812/NF-3012/NF-3013
Product Categary:
Residential Membrane Element
Main Feature:
It has the selective desalination mechanism for removal of high polyvalent ions and partial maintaining of monovalent ions with health benefits. Moreover, home drinking NF1 membrane elements can achieve as the high rejection, ultra-low operating pressure for desalination of raw water with low salt concentration.
USAGE
It is applicable to the desalination of raw water with salt concentration less than 500ppm. It can be widely applied to various small size household water purification, mineral water machine and energy machine etc..
SPECIFICATIONS & PARAMETERS
Model : NF-1812
Active Membrane Area ft2(m2) : 4(0.37)
Permeate Flow GPD(T/D) : 100(0.38)
Rejection Rate (%)[NaCl] : 30-50 Rejection Rate (%)[MgSO4] : 96
Model : NF-2012
Active Membrane Area ft2(m2) : 6(0.56)
Permeate Flow GPD(T/D) : 150(0.57)
Rejection Rate (%)[NaCl] : 30-50 Rejection Rate (%)[MgSO4] : 96
Model : NF-2812
Active Membrane Area ft2(m2) : 10(0.93)
Permeate Flow GPD(T/D) : 250(0.95)
Rejection Rate (%)[NaCl] : 30-50 Rejection Rate (%)[MgSO4] : 96
Model : NF-3012
Active Membrane Area ft2(m2) : 14(1.30)
Permeate Flow GPD(T/D) : 350(1.32)
Rejection Rate (%)[NaCl] : 30-50 Rejection Rate (%)[MgSO4] : 96
Model : NF-3013
Active Membrane Area ft2(m2) : 14(1.30)
Permeate Flow GPD(T/D) : 400(1.51)
Rejection Rate (%)[NaCl] : 30-50 Rejection Rate (%)[MgSO4] : 96
STANDARD TEST CONDITION
Concentration of Solution : 500ppm (NaCl), 2000ppm(MgSO4)
Temperature(℃): 25
pH Value : 7.5-8
Operating Pressure psi(MPa) : 60(0.41)
Recovery Rate(%) : 15
Notes: The permeate flow of single membrane element may vary with in ±15%.
Operating Limits and Conditions of Membrane Element:
Max. Working Pressure : 300 psi(2.07MPa)
Max. FeedWater Temperature : 45℃
Max. FeedWaterSDI15 : 5.0
Free Chlorine Concentration of Feed Water : 0.1mg/L
pH Range of Feed Water During Continuous Operation : 3-10
pH Range of Feed Water During Chemical Cleaning : 2-12
Max. Pressure Drop of Single Membrane Element : 10psi(0.07Mpa)
Other supplier products
All supplier products
Same products