petroleum products Aniline point Tester FDH-2111
Aniline point of petroleum products tester FDH-2111Application range Aniline point of the petroleum products oximeter applicable standards: ISO2977 GB/T262 This instrument applies to the determination of the aniline point of the petroleum products, the test method is the predetermined volumes of aniline and the sample placed in a test tube, and mechanically stirred and mixed.The mixture was heated at a controlled rate until the two-phase mixed thoroughly.Then the temperature of the mixture under cooling at a controlled rate, when the two phases were separated, the recording of the aniline point. Features 1, accurate photoelectric detector separation of state; 2, the high-power solid-state regulator to control the heating rate; 3, the voltage shows a heating state; 4, integrated structure, easy to operate; 5, standard glass test tube, in line with the requirements of the standard;Specifications 1, Heating: Electric tube heating 2, the mixing method: flexible shaft agitation 3,Detection: photoelectric detection 4 Measuring range: room temperature ~ 150°C 5 Working Power: AC220V 50HZ 6, the temperature adjustment: a solid-state regulatorSend product request
Other supplier products
| Automatic saturated Vapour pressure tester of petroleum products (Reid method) FDR-0231 | Automatic saturated vapor pressure tester (Reid method) FDR-0231 Applied standards: ASTM D323, GB/T8017, ISO 3007 Application range: determi... | |
| FDT-1231 Lubricating Oil Air Release Value Tester | FDT-1231 Lubricating Oil Air Release Value Tester Purpose FDT-1231 Lubricating Oil Air Release Value Tester is designed and made as per SH/T0308... | |
| Interfacial tension tester automatically FDT-1011 | Application range In accordance with the requirements of GB6541 method, a new technology designed by a new generation of tension tester.Precise co... | |
| Spontaneous combustion point tester FDT-1402 | Application range To meet the DL/T706-1999 "power plants with anti-fuel self-ignition point measurement method" requirement.For the determinatio... | |
| The oil density Tester FDT-1501 | Application range Petroleum products density test is used in accordance with GB/T1884-92 "petroleum and liquid petroleum products densitometry ... |
Same products
| NSF H-1 Food Grade Fluorine PFPE Grease for Chemical and High Temperature, Extreme Pressure | Seller: Dongguan Vnovo New Material Technology Co., ltd | ●NSF H1 certificatedas non-toxic and no stimulating or volatile chemical materials; ●Great cost p... | |
| Food Grade Silicone Grease with PTFE for O-rings Bearings Gears | Seller: Dongguan Vnovo New Material Technology Co., ltd | ●Silicone base oil, provides long-lasting lubrication in humid environments; ●With PTFE added, g... | |
| NSF H-1 Food Grade Silicone Grease for O-rings | Seller: Dongguan Vnovo New Material Technology Co., ltd | ●Great performance of long-term lubricating in humid environment; ●Adopted hydrophobic thickener... | |
| Petrochemical Nuts And Bolts | Seller: Jiangsu Aokai New Material Technology Co., Ltd | The standard refers to the American ASTM or ASME standard with new and unique technical clauses a... | |
| sillicon carbide | Seller: Zhenhuan Metallurgical Refractory Co. ltd. | Silicon carbide Silicon carbide is made of quartz sand, petroleum coke (or coal coke), wood chips... |















