变压器油氧化安定性测定仪 FDH-1001
Aniline point of petroleum products tester FDH-2111Application range
Aniline point of the petroleum products oximeter applicable standards: ISO2977 GB/T262 This instrument applies to the determination of the aniline point of the petroleum products, the test method is the predetermined volumes of aniline and the sample placed in a test tube, and mechanically stirred and mixed.The mixture was heated at a controlled rate until the two-phase mixed thoroughly.Then the temperature of the mixture under cooling at a controlled rate, when the two phases were separated, the recording of the aniline point. Features
1, accurate photoelectric detector separation of state;
2, the high-power solid-state regulator to control the heating rate;
3, the voltage shows a heating state;
4, integrated structure, easy to operate;
5, standard glass test tube, in line with the requirements of the standard;Specifications
1, Heating: Electric tube heating
2, the mixing method: flexible shaft agitation
3,Detection: photoelectric detection
4 Measuring range: room temperature ~ 150°C
5 Working Power: AC220V 50HZ
6, the temperature adjustment: a solid-state regulator
Other supplier products
|
|
FDH-1501发动机油边界泵送温度测定仪 |
【简单介绍】
发动机油边界泵送温度测定仪适用标准：GB/T9171、ASTM D3829 发动机油边界泵送温度测定仪采用当代先进技术，集机械、光学电子及计算机技术于一体，进行温度测量，恒温控制。控温精确、稳定。发动机油边界泵送温度测定仪结构合理，性能稳定，操作简单，是理想的分析检测设备。
【详... |
|
|
FDH-6271 portable lubricant composite index measuring instrument |
Application range
Portable lubricant composite index measuring instrument to reflect changes in certain parameters of the oil in the oil aging.usin... |
|
|
oil density Tester FDT-1531 |
Application range
Electric furnace process carbon residue tester is designed and manufactured according to the requirements specified by the the t... |
|
|
oil density Tester FDT-1531 |
Application range
This instrument is designed for the determination of aviation gasoline and automotive instrument gum content in gasoline, gasol... |
|
|
FDH-0701润滑油老化特性测定仪 |
适用范围
润滑油老化特性测定器是根据SH/T0192 GB/T12709试验方法的要求设计制造的。适用于测定润滑油老化特性。包括两个方法：A法：通空气老化后康氏残炭增值法。B法：在三氧化二铁存在下通空气老化后的康氏残炭法。
功能特点
1、本仪器主要由温度控制部分、金属浴部分、空气流量调节部... |
供应产品
Same products
