polyethylene(PE)
High Density Polyethylene (HDPE)
Other name:poly
CAS: 9002-88-4
HS Code: 39012000
MF:CH2
Purity: 95%
Grade: Blow molding grade, injection molding grade, film grade, pipe extrusion grade, raffia grade
High-density polyethylene (HDPE) or polyethylene high-density (PEHD) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE.
Application: Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating.
Packing: 25kg/pp net bag, 22MT/20FCL. also meet your special requirements
CERTIFICATE OF ANALYSIS
Technical Data
High Density Polyethylene Extrusion 8800
Density g/cm3 .956
Melt Mass-Flow Rate (MFR) g/10 min--------0.04
Elongation at Break % min
Tensile Stress at Yield kg/cm
Tensile Stress at Break kg/cm
Tensile Strain at Break %
Flexural Modulus kg/cm
Durometer Hardness (D Scale, Compression Molded)----64
power ash%.01
HDPE Blow Molding Grade
Property Unit Test method Typical Value
Mass density g/cm3 ASTM D-1505 0. 955
Melt flow Rate(190℃/2. 16kg) g/10min ASTM D-1238 0. 35
Tensile yield strength MPa ASTM D-638 27
Flexural modulus Mpa ASTM D-790 1370
Elongation@ break % ASTM D-638 > 600
Brittle temperature ℃ ASTM D-746 < -75
ESCR h ASTM D-1693 45
ESCR h ASTM D-1693 35
Send product request
Other supplier products
|
|
polyethylene(PE) | High Density Polyethylene (HDPE) Other name:poly CAS: 9002-88-4 HS Code: 39012000 MF:CH2 Purity: 95% Grade: Blow molding grade, injection mol... |
 |
polypropylene(PP) | Properties ASTM Test Condition Unit Typical Values Grade PPGF20 PPGF30 PPGF40 Density D-792 - g/cm3 1.05 1.15 1.20 Moistureabsorption D-570 23... |
