Resin-specific adsorption of gold
Indicator Parameter
Functional group -N+(CH3) 2H2O
Appearance Milky white opaque sphere
Finished form CLˉ
Moisture content % 45-55
Weight whole exchange capacity mmol/g ≥5.0
Volume whole exchange capacity mmol/ml ≥1.50
Wet density g/ml 1.05-1.1
Wet real density g/ml 0.68-0.75
Particle size range % (0.6-1.80mm)≥95%
Granularity （<0.6mm）≤1.0
Uniformity coefficient 1.5
Sphere rate after abrasion % ≥95%
Indicator Parameter
Regeneration concentration HCl:2-4%；/NaOH:2-4%
pH range 1-10
Highest use temperature℃ OH-100/Cl-40
Expansion rate (OHˉ→Clˉ)% ≤15-20%
Operational flow speed m/h 10-30
Desorption ： "Resin adsorption of gold thiourea with 9% + 3% sulfuric acid analysis, analytical dosage of 6-8 times the bed volume, contact time with Resin for 2h or more.
"
Regeneration process： Resin after resolution after washing, rinse with 2-3 times the bed volumeNaOH, about 1 hour, then rinse renewable HCl solution, the dosage is 2 times the bed volume, time is about 1.5h, washed clean and odor can be the last. (Regeneration concentration reference Reference of indicator)
Other supplier products
|
|
caustic soda |
Item Index
Causiu Soda flakes（NaOH）% ≥ 99
Sodium carbonate（NaCO3）% ≤ 0.5
Sodium chloride（NaCl）% ≤ 0.03
Ferric oxide（Fe2O3）% ≤ 0.005... |
|
|
Dimethylamine |
Appearance: colorless transparent liquid.
Dimethylamine ≥ 99.8%;
Monomethylamine ≤ 0.10%;
Trimethylamine ≤ 0.05%;
Ammonia ≤ 0.03%;
Purposes: m... |
|
|
Dimethylamine |
Appearance: colorless transparent liquid.
Dimethylamine ≥ 99.8%;
Monomethylamine ≤ 0.10%;
Trimethylamine ≤ 0.05%;
Ammonia ≤ 0.03%;
Purposes: m... |
|
|
Potassium dichromate |
Item Index
Potassium dichromate （K2Cr2o7） % ≥ 99.7
Chlorides (Cl)% ≤ 0.05
Insoluble ≤ 0.02
Sulfates ( SO4-2) % ≤ 0.02
Na+ % ≤ 0... |
|
|
Aluminum Tripolyphosphate |
Model APW-1 APW-2 ATP
Phosphorus pentoxide(%) ≥ 42.5-46.5 35.0-40.0 64-68
Aluminum oxide(%) ≤ 11.0-15.0 9.5-13.5 13-17
Silica(%) ≤ 13.5... |
All supplier products
Same products
