Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certification
Excellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivity
Mix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.
Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.
GOLOHO-4313(W)-AB is a two part flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .
HOW TO USE GOLOHO-4313-AB
Stirred thoroughly before mixing
Mixed in 1:1 ratio by weight
Agitation: mixed thoroughly by low speed agitation
Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes
Send product request
Other supplier products
 |
Addition Silicone Rubber | Addition Silicone Rubber GOLOHOproduces no by-productsrtv greasein the curing process, allowing their use in deep section and complete confinement.... |
 |
RTV-1 Silicone Rubber | RTV-1 silicone is a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. It can be also... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a heat cure silicone adhesivessilicone glue ·Convenient to use: one... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a high-performance heat vulcanized silicone glue ·Convenient to us... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
Cover Tape | Seller: Zhuhai Tongxi Electronics Technology Co., Ltd | Cover tapeis a strip material used for SMD packaging of electronic products, often used in conjun... |
 |
Acrylic Design Artwork Cutting | Seller: Beijing KangDa ShengXin Acrylic Products Co., Ltd | Acrylic Design Artwork Cutting PRODUCT DESCRIPTION We specialize in custom acrylic high process... |
