Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB
FEATURES OF GOLOHO-4313-AB
Flammability,UL-94V0 certification
Excellent resistance to high and low temperature, weather, ultraviolet light and aging, excellent performance of insulation and thermal conductivity
Mix ratio 1:1, mixed color is W/G, low viscosity, good flowability, long working time, Rapid integrated curing speed, suitable for encapsulation of extensive module.
Superior heat curing feature allows a wide range of area and depth of sealing parts, smooth surface and out from within.
GOLOHO-4313(W)-AB is a two part flame retardant additional thermal conductive encapsulant particularly designed for electrical industrial. It will form rubber elastomer non-corrosive to metal at room or low temperature .
HOW TO USE GOLOHO-4313-AB
Stirred thoroughly before mixing
Mixed in 1:1 ratio by weight
Agitation: mixed thoroughly by low speed agitation
Foam scrubbing: evacuation for 5 minutes after mixing. Dispose it if a small amount of operation or no critical request of foam.
Encapsulation: pour into the article immediately after agitation and foam scrubbing thoroughly, it can flow flat naturally
Curing 1:curing at room temperature for 2.5 hours. The cure rate is rapidly accelerated with heat
Curing 2: curing by oven. After 30 min standing and foam scrubbing thoroughly and preliminary curing at room temperature, the encapsulant will be cured at 70℃ for 20 minutes
在线联系供应商
Other supplier products
 |
Addition Silicone Rubber | GOLOHO heat cured silicone rubberproduces no by-products in the curing process, allowing their use in deep section and complete confinement. GOLOHO... |
 |
High Performance Silicone Adhesive/Sealant - 3334 | FEATURES OF heat and water resistant sealantheat proof silicone adhesive- 3334 Convenient: one-part, deoximation, rapid cure at room temperature Ne... |
 |
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB | FEATURES OF GOLOHO-4313-AB Flammability,UL-94V0 certification Excellent resistance to high and low temperature, weather, ultraviolet light and agin... |
 |
Heat Resistant Silicone Adhesive/Sealant - 3912R | heat resistant silicone glue/Sealant - 3912R FEATURES OF GOLOHO-3912R ·UL certificated product(E254532)·One-part RTV silicone rubber&... |
 |
RTV-1 Silicone Rubber | RTV-1 Silicone Rubber RTV-1 silicone is a conductive silicone rtvthat is gradually cured from outside to inside by contacting with moisture in the ... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | 卖方: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
Cover Tape | 卖方: Zhuhai Tongxi Electronics Technology Co., Ltd | Cover tapeis a strip material used for SMD packaging of electronic products, often used in conjun... |
 |
Acrylic Design Artwork Cutting | 卖方: Beijing KangDa ShengXin Acrylic Products Co., Ltd | Acrylic Design Artwork Cutting PRODUCT DESCRIPTION We specialize in custom acrylic high process... |
