.

Reason Analysis of Using AOC Active Optical Cable in Data Center Wiring

40G/100G AOC active optical cable has been globally introduced throughout the aoc data centerfield. Compared to 40G DAC copper cable, 40G AOC active optical cable has unparalleled advantages in data transmission environment above 7 meters, including the smaller size, lighter weight, easier bending, easier management, longer signal transmission distance, etc. In the data center, the same goals can be achieved with a 40G SR4 optical transceiver. The differences between 40G AOC active optical cable and SR4 optical transceiver are analyzed as follows:

With the same transmission distance, for SR4 optical transceiver, different optical fiber jumpers that are connected to the same module will produce different insertion loss and return loss, which is basically a common problem. However, as long as the variation is within the range, there will be no significant change in the eye map and other related indexes.

The AOC active optical cable which is well made is basically stable and has better rocking performance. The repeated test of the SR4 optical transceiver produced a large fluctuation.

It is measured at four combinations of input voltage and signal amplitude to ensure that the performance can be maintained at both the lowest and highest voltages and temperatures. AOC active optical cable is required to pass quadrant tests with a wide temperature range to ensure that the MPO interface and cable of AOC will not melt at high temperatures. The performance change of MPO interface itself at high and low temperatures can meet the change of 0.3 dB, and the materials used are PEI materials that can resist the temperature of above 120 degrees.

As an all-in-one product, the all-in-one test ensures the performance of the product, which may be more stable than SR4 optical transceiver that adopts MPO jumper with uncertain performance. Compared with SR4 optical transceiver that confirms the quality through optical eye diagram, AOC active optical cable mainly uses the eye diagram to judge the quality of indicators.

QSFP+ SR4 optical transceiver has the DDM monitoring function. When receiving coupling, the ADC value of the receiver can be monitored in real time to determine the optimal coupling. Therefore, SR4 is more superior than AOC in terms of receiving sensitivity.

There is not much difference in the OM3 fibers, but the 40G QSFP+ SR4 optical transceiver provides better performance control. QSFP+SR4 is recommended if you want to achieve a longer distance (> 300 m) transmission.

Active fiber optical cable (AOC) is recommended based on the data connection in the data center, because it provides better wiring consistency and repeatability, and the closed ends are easier to avoid the effects of environmental and vibration oscillations. If there is a failure, it can be replaced directly without the need to carry out a series of end-to-plug tests of 40G QSFP+SR4 optical transceiver and MPO jumper on site, which is more beneficial to save costs.

There are many fiber optic accessories suppliers, but we are one of the best choices for you.



Send product request

To: T&S COMMUNICATIONS CO., LTD.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

FIBER OPTIC CONNECTOR
FIBER OPTIC CONNECTOR Thefiber optic quick connectorsis composed of ceramic ferrule and connector kits. different types of connector kits and ferrules are pre-assembled ...
FBG ID REFLECTOR
FBG ID REFLECTOR FBG ID Reflector FBG Reflector can be used in FTTX fiber trouble-shooting monitoring. The combination of the OTDR and FBG Reflector can detect and...
MTP/MPO LOOPBACK
MTP/MPO LOOPBACK T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed b...
100G QSFP28 AOC
100G QSFP28 AOC T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/E...
MTP®/MPO LOOPBACK Adapter
MTP®/MPO LOOPBACK Adapter T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-desig...
All supplier products

Same products

2D Matrix Fiber Array
2D Matrix Fiber Array Seller: Zhongshan Meisu Technolody Co.,Ltd Two-dimensional M * N fiber array is a kind of fiber component that has many fibers arranged orde...
Endoscope Cable for STORZ H3-Z
Endoscope Cable for STORZ H3-Z Seller: Hangzhou Sihan Medical Equipment Co., Ltd Endoscope Cable for STORZ H3Z Introducing the brand new STORZ H3-Z Cable Replacement, meticulous...
Steel Fiber For Industrial Floors
Steel Fiber For Industrial Floors Seller: Tengzhou Star Smith Metal Products Co.,Ltd Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground ...
Orivision DVI Extender
Orivision DVI Extender Seller: Nantong ZYDZ Electronic Co., Ltd. Orivision DVI Extender ORIVISION offers a wide selection of products for extending DVI video, aud...
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out Seller: Nantong ZYDZ Electronic Co., Ltd. Brand: ORIVISION Model: ZY-DS931 Input Interface: LAN Port*1 Output Interface: SDI*2, audio*1 Vid...