Upper Leather Flexing Tester
Main uses:
VAMP VAMP leather extension testing machine with a certain frequency of zigzag test, observe the change of the surface of the test piece, whether the surface of the wrinkle and crack and its severity to evaluate the zigzag resistance of the test material.
Meet the standard:
GB/T20991-2007. EN ISO. SATRA TM25. ISO 4643 and other standards.
Product Advantages:
Measures Key Durability: Evaluates the flexing endurance and resistance to cracking of shoe upper materials, a crucial factor for footwear lifespan and appearance.
Standard Compliant: Designed to meet relevant national and international standards (SATRA TM25. ISO 4643. GB/T 20991. EN ISO 20344 sections on upper flexing) for testing upper material flexing resistance.
Simulates Wear on Upper Materials: Replicates the bending and stretching stresses experienced by the shoe vamp during walking.
Evaluates Resistance to Wrinkles/Cracks: Provides a method to assess the material's propensity to develop surface damage from flexing.
Provides Objective Visual Assessment Criteria: Evaluation is based on observing and assessing the severity of wrinkles and cracks according to standard criteria after testing.
Multiple Testing Stations: Available with options for testing multiple samples simultaneously (4 or 12), increasing testing throughput.
Controllable Test Parameters: Allows for precise control of flexing speed, stroke, and clamping angle.
Quantitative Result: Results are based on the number of flexing cycles performed until a specified damage level or after a fixed number of cycles.
Technical specifications:
1. Expansion speed: (300±30)r/min
2. Expansion stroke: (19±1.5)mm
3. Sample size: (64±1)mm*(64±1)mm
4. Number of test pieces: 4. 12 samples
5. Clamping Angle: (40±1)°
6. Volume: 70cm*36cm*37cm
7. Power source: AC220V,10A
Random configuration:
1. 1 standard sampling cutter die
2. One power cable
Send product request
Other supplier products
 |
Wet penetration tester EN ISO 22610 EN 14126 | Wet penetration tester Application: Protective Clothing Tester Wet Microorganism Bacterial Penetration Resistance Tester Apparatus: used to measur... |
 |
MARK-II anti-slip testing machine | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
10kN Universal Testing Machine | Standards: 1. Manufactured according to GB / T2611 "General Technical Conditions for Testing Machines" and GB / T 16491-2008 "Electronic Univers... |
 |
Carpet Static Load Tester | Instrument Features - Simulate the imprints caused by furniture - Meet international standard requirements - Combine the static load tester wit... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber/ head protection thermal testing equipment / Helmet high temperature pre-treatment chamber | Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Te... |
Same products
 |
Scott Flex Tester | Seller: Standard International Group (HK) Limited | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | Seller: Standard International Group (HK) Limited | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
