Super soft and slippery hydrophilic silicone softening agent used for the continuous processing

• 

Product introduction
Waxy silicone emulsion M-200A is emulsified by M200. M-200 is composed of Polymerization of epoxy silicone oil and ammonia ether, adding epoxy polyether to extension chain at last. ( solvent is ethylene glycol monobutyl ether, Content is 40%). It is efficient resistant to high temperature and alkali.
Basic characteriatics
Appearance: colorless transparent liquid
Ionic properties: slight cationic
PH value: 6.0-6.5
Solubility: dissolved in any proportion of water

Application Range
Especially suitable for all kinds fiber
Smoothness: ★★★★★
Softness: ★★★★
Filling power: ★★★
Elasticity: ★★★
Note: Five star is best
Usage
This product is of high efficient , softening agent, used after diluting 4～5 times (1:4～5), without emulsifiers, dissolved in any proportion of water, tiring evenly, and then slowly add the remaining water, the emulsion is a colorless transparent liquid.
After diluting, the product can be used by exhausting and continuous padding
Exhausting : 2—4%（OWf）,30—40°C/15--30min; PH=5—7
Bath ratio：20--40；
Padding : 10—40g/l
Package And Storage
50kgs or 120kgs per plastic drum. Should be stored in a cool ventilated place, to avoid sun exposure, the storage period is two years.

Other supplier products

	professional supply block silicone micro emulsion for fabric finishing agent and textile industry	Basic characteristics Appearance: Colorless or light yellow transparent thick liquid Ionic nature: slight cationic pH : 4.5-6.5 Solubility: can be ...
	silicone softener agent for chemicals fabric M-06	Basic characteristics Appearance: light yellow transparent liquid Ionic nature: slight cationic Solubility: can be dissolved in any proportion of w...
	Woollen blanket soomth Block Silicone Oil agent with MSDS	M-100 is composed of Polymerization of epoxy silicone oil and ammonia ether, adding epoxy polyether to extension chain at last. ( solvent is ethyle...
	New Type Multi-functional finishing agent for chemicals fabric 6603H	Basic Characteristics Appearance: light yellow irregular solid Solid content: 98% Ionic nature: non ionic pH：5-6 Storage: avoid exposure at room te...
	anti-pilling agent textile finishing 6604K	Basic Characteristics Appearance: white powder Solid content: 98% Ionic nature: non ionic pH:6.0-8.0 Properties and advantages 1. suitable for poly...

Same products

	OSi PEMS 57 CAS 70914-12-4	Seller: OSi Holding Limited	Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene...
	LC12 Two-Component Solvent Free Silicone Conformal Coating	Seller: Nanjing Silfluo New Material Co., Ltd.	Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati...
	LA-17 Polyether Modified Short Chain Polysiloxane	Seller: Nanjing Silfluo New Material Co., Ltd.	Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has...
	LA-14 A Modified Trisiloxane and an Silicone Surfactant	Seller: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico...
	LA-11 A Modified Trisiloxane and an Silicone Surfactant	Seller: Nanjing Silfluo New Material Co., Ltd.	(It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe...