Gas Regulator
Integrated Gas Technologies(IGT®) is a global gas control equipment company founded 2006 excelling in manufacturing and marketing of LPG cylinder regulators and accessories. All IGT products are of our own design, IPR protected, well surface treated attached with local language working instruction, and approved to international standards.
PRODUCTS
Different Gas Regulator Types
Low Pressure Gas Regulator
Snap On Compact Low Pressure Regulator Basic+Standard Type for A120is/ A121is/ A122is/ A127is
Snap On Compact Low Pressure Regulator Premium Type for A120isp/ A121isp/ A122isp/ A127isp
Snap On Compact Low Pressure Regulator Premium Plus Type for A120isp-M/ A121isP-M/ A122isp-M/ A127isp-M
Jumbo Clip On Gas Regulator for A235is/ A235/ A235IT
Hand Wheel/Threaded-on Regulator Basic+Standard Type for A300is/ A310is
Hand Wheel/Threaded-on Regulator Premium Type for A300isp/ A310isp
Hand Wheel/Threaded-on Regulator Premium Plus Type for A300isp-M/ A310isp-M
A400i/ A410i LPG Pressure Regulator
Camping Gas Regulator for A500is/ Y100is
Domestic LPG Regulator for JYT0.6-B/ JYT0.6-M/ JYT0.6-PM
Low Pressure Gas Regulator
Medium Pressure Gas Regulator for A302/ A310/ A312
High Pressure Gas Regulator
Sanp-on HP Regulator for B120
Jumbo Clip-On High Pressure Lpg Regulator For B235is
LPG Threaded Gas Regulator For B300/ B310
High Pressure Gas Regulator
Caravan & Marine Gas Regulator
Gas Regulator Connector
Unreduced Pressure Gas Regulator Connector C120/ C121/ C122/ C127
Unreduced Pressure Gas Regulator Connector C235is
Gas Regulator Connector
Gas Regulator Safety Features
Test and monitor
Safety
Diaphragm relief valve
Cut off 100% of gas flow
IGT Gas RegulatorSafety Features
IGT regulators with low level indicator will help users to make a precise & convenient leak test, and continuously monitor low gas level.
The automatic hose failure safety(Excess Flow Valve) Cut off 90% of gas flow and reduce an accident
The diaphragm relief valve opens at a preset pressure i.e 150mbar. Protect against overpressure in downstream pipes. Only for outdoor use or in ventilated compartments.
IGT regulators with manual excess flow valve will cut off 100% of gas flow in case of a big leakage and stop an accident before it develops.
Certificates Worldwide
There're different standards in different countries. As a professional gas regulator manufacturer, we are proud to say that IGT gas pressure regulators meet most of the standards around the world.
Gas Regulator Leak Detection
The gas pressure regulator is connected to the gas appliance by a gas connection hose. The gas appliances should be in a shut-off position.
The auto gas hose and regulatoris attached in the correct position on the gas regulator valve.
The adjustable gas pressure regulator is switched to the ON position. The dial of the indicator should then go into the green area.
The gas pressure regulator switch is moved back to the OFF position. The dial of the indicator should then remain in the green area.
Wait 1 minute. If the dial is still in the same green area the installation is safe without leaks. If the dial has moved to yellow or blue colour, the gas pressure regulator installation is not safe and should be checked by using leak Detecting spray.
Any leak should be eliminated before the use of the gas appliance.
Warranty:
All IGT Regulators are supplied with 5 years warranty Terms apply.
FAQS
Gas Regulator FAQs
Do gas regulators need to be installed horizontally?
It depends the LPG regulator types.
Where should LPG gas regulator be located?
Do gas regulators need to be vented outside?
What is typical residential gas pressure?
What happens if gas pressure is too low?
How are your gas pressure regulator shipped?
Gas Regulator Installation
How to install the IGT gas safety device?
Take out the safety device of gas pressure regulator from the box, check the ON/OFF Knob, manometern, manual Reset button and push Locking switch.
First, fix the LPG gas hose pipe in the safety device. And ensure that Knob is on OFF position.
Then, Press the switch inside and hold it, then fix the safety regulator to the cylinder. Apply some pressure and the gas regulator is fixed.
At last. turn on the Knob. Lit the stove.
If need to to change the cylinder, you need to OFF knob to downward direction and press the switch and remove the gas regulator device.
Send product request
Other supplier products
 |
Gas Torch | Introduction Set packed with hoses, regulator arm support of gas Torch Gas blow torchSpecification Description Torch ... |
 |
Gas Cylinder Adaptor | Introduction 1'' -20UNEF female to T33x5 male Gas Cylinder AdaptorSpecification Size Material Gas Cylinder Adaptor ... |
 |
Needle Valve | Introduction A900-178: 3 way gas needle valveassembly Zinc alloy propane needle valveSpecification Size Material ... |
 |
Snap On Compact Low Pressure Regulator Basic+Standard Type for A120is/ A121is/ A122is/ A127is | Introduction A120isD1: Low pressure gas regulatorwith 20mm inlet A122isU1: Low pressure gas regulator with 8mm outlet A127isU2: Low-pres... |
 |
High Pressure Gas Regulator | High pressure gas regulatorreduces cylinder pressure from the gas bottle to a consistent regulated pressure as required by the application. Regulat... |
Same products
|
|
Gas Regulator | Seller: Ningbo Shuai Xian Regulator Co., Ltd | Integrated Gas Technologies(IGT®) is a global gas control equipment company founded 2006 exce... |
 |
Gas Manometer | Seller: Ningbo Shuai Xian Regulator Co., Ltd | Introductionof gas manometer for sale Gas Manometer: The manometer indicator is to enable the ... |
 |
EDDHA Fe 6% | Seller: Nanchang Changmao Chemical Co. Ltd. | Product Appearance Content ortho-ortho pH(1%solution) Water insoluble EDDHA Fe B... |
