Non-welded Hinged Semi-rigid Bow Spring Centralizer
Non-welded Hinged Semi Rigid Centralizer
Saigao's non-welded hinged semi-rigid bow spring centralizers ensure high efficiency in casing jobs on deviated and horizontal wells. Combining the features of a standard bow spring centralizer with those of a rigid centralizer, these centralizers provide a very high restoring force in combination with a very low starting force for centralising the casing pipe in vertical, deviated, and horizontal wells.
A non-welded design features the self-locking of lips for holding bows to end collars. Bows of special alloy steel are hot-formed and then tempered for optimum strength, resilience, and uniformity. The bows can also be configured for any hole diameter with a choice of various standard bow heights for optimum starting and restoring forces.
Performance Features of Non-welded Hinged Semi-rigid Bow Spring Centralizer
Saigao's semi-rigid centralizers attain higher stand-off, when compared to other bow spring centralizers, because of their higher restoring force.
Able to withstand high lateral loads.
The spring characteristics of its double-crested profile permit compression to facilitate movement through tight spots and dog legs.
A high restoring force combined with a low starting force is achieved with all bow heights.
Installation on the casing pipe is very convenient since it simply requires the placement of the two assembled halves on the pipe and the insertion of the pin in the end collar hinge.
SAIGAO GROUPoffers a wide range of bow heights and shapes enabling the customer to make an optimum choice matching their requirements.
These centralizers are designed to be installed between stop collars or casing collars. Saigao does not recommend installing semi-rigid centralizers over a stop collar.
Options of Non-welded Hinged Semi-rigid Bow Spring Centralizer
Non-welded hinged semi-rigid bow spring centralizers are available in the sizes 2 ⅞" to 30"
Special sizes or combinations can be made available on request
If you want to know more kinds of oilfield cementing tools, please visit our website.
Send product request
Other supplier products
 |
Cementing Head | cement head oilfieldused in the oilfield is designed to hold a cementing plug before it is pumped down the casing during the cementing operation. I... |
 |
8-5/8'' Casing Pipe | Oil casing is the lifeline for maintaining oil well operations. Due to different geological conditions, the state of the downhole is complicated, a... |
 |
Lifting-releasing and Circulating Overshot | Lifting-releasing and circulating overshotis a fishing tool used to retrieve the fractured tubing and drill string in the casing. If the drill stri... |
 |
Cementing Plug | Saigao Rubber plug used to separate the cement slurry from other fluids, reducing contamination and maintaining predictable slurry performance. Two... |
 |
Choke Valve | Choke valve oil and gasis a valve that controls the flow of a fluid by changing a throttle section or a throttle length. The choke valve and the ch... |
Same products
 |
PVC cazn stabiliizer for pipe GX-401 | Seller: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | GX-401PVC Cazn stabilizeris a composite calcium-zinc stabilizer synthesized by our company using ... |
 |
PVC stabilizer for board and pipe G-102 | Seller: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | G-102 is a compound stable lubrication additive newly developed by Lianfu Company. Compared with ... |
 |
PVC stabilizer for foaming soft product | Seller: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | PVC stabilizer for foaming soft product Appearance: White or slightly yellow flake or powdery m... |
 |
PVC cazn stabilizer for spc floor | Seller: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | GX-301A stabilizeris a composite calcium-zinc stabilizer synthesized by our company using a one-s... |
 |
PVC stabilizer for edge banding G-103 | Seller: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | Properties: This product is insoluble in water. Purpose: This PVC stabilizerproductis a specia... |
