Non-welded Hinged Semi-rigid Bow Spring Centralizer
Non-welded Hinged Semi Rigid Centralizer
Saigao's non-welded hinged semi-rigid bow spring centralizers ensure high efficiency in casing jobs on deviated and horizontal wells. Combining the features of a standard bow spring centralizer with those of a rigid centralizer, these centralizers provide a very high restoring force in combination with a very low starting force for centralising the casing pipe in vertical, deviated, and horizontal wells.
A non-welded design features the self-locking of lips for holding bows to end collars. Bows of special alloy steel are hot-formed and then tempered for optimum strength, resilience, and uniformity. The bows can also be configured for any hole diameter with a choice of various standard bow heights for optimum starting and restoring forces.
Performance Features of Non-welded Hinged Semi-rigid Bow Spring Centralizer
Saigao's semi-rigid centralizers attain higher stand-off, when compared to other bow spring centralizers, because of their higher restoring force.
Able to withstand high lateral loads.
The spring characteristics of its double-crested profile permit compression to facilitate movement through tight spots and dog legs.
A high restoring force combined with a low starting force is achieved with all bow heights.
Installation on the casing pipe is very convenient since it simply requires the placement of the two assembled halves on the pipe and the insertion of the pin in the end collar hinge.
SAIGAO GROUPoffers a wide range of bow heights and shapes enabling the customer to make an optimum choice matching their requirements.
These centralizers are designed to be installed between stop collars or casing collars. Saigao does not recommend installing semi-rigid centralizers over a stop collar.
Options of Non-welded Hinged Semi-rigid Bow Spring Centralizer
Non-welded hinged semi-rigid bow spring centralizers are available in the sizes 2 ⅞" to 30"
Special sizes or combinations can be made available on request
If you want to know more kinds of oilfield cementing tools, please visit our website.
在线联系供应商
Other supplier products
 |
Drill Pipe Single Plug Cement Head: Product No. ZSC-03 | Plug Dropping Indicator. Plug release Plunger Assembly. Pitching device. Bearing, rotating easy. Plug valves threaded connection. The type cem... |
 |
Hydraulic Liner Hanger Tie-Back Assembly | The tie-back assembly is a special tie back cementingtool for tieback operation. Tieback equipment allows existing liners with a receptacle to be ... |
 |
BW1500/12 Horizontal Four Cylinder Reciprocating Single Acting Piston Pump | Four 1500/12 mud pump is horizontal four cylinder reciprocation single acting piston pump. It is widely used in mining, drilling, coal, railway, h... |
 |
Adjustable Choke Valve | Adjustable Choke Valvehas forged steel valve body, which is characterized as high pressure resistance and erosion resistance. It can be operated ma... |
 |
Key Seat Wiper | Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could... |
Same products
 |
PVC cazn stabilizer for spc floor | 卖方: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | GX-301A stabilizeris a composite calcium-zinc stabilizer synthesized by our company using a one-s... |
 |
PVC stabilizer for edge banding G-103 | 卖方: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | Properties: This product is insoluble in water. Purpose: This PVC stabilizerproductis a specia... |
 |
PVC stabilizer for cable DL-8 | 卖方: Shenzhou Lianfu Plastic-Rubber Tech. Co., Ltd | Appearance: White or slightly yellow flake or powdery material. Properties: This product is in... |
 |
Orientation Sub | 卖方: SHANDONG SAIGAO GROUP CORPORATION | Orientation Sub Orientation subis a major power deflection tool having a fixed angle deviated fr... |
 |
Oil Field Tubing Pipe | 卖方: SHANDONG SAIGAO GROUP CORPORATION | Product Description API-5CT Tubing Pipe Steel grade: J55/K55/N80/L80/P110/C95/13Cr/28Cr Pipe E... |
