BM1K Solid Colors (Basecoat Colors)
BM1K Solid Colors (Basecoat Colors)
Auto Coatings Manufacturers
Product Name/Model：BM1K Solid Colors (Basecoat Colors)
Characteristic:BM1K Solid Colorwith excellent leveling property,easy construction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
BM1k Solid Colors |
Thinner |
|
1 |
1 |
|
BM1k Solid Colors |
BYTX-1 Fast Thinner |
|
BM1k Solid Colors |
BYTX-2 Standard Thinner |
|
BM1k Solid Colors |
BYTX-3 Slow Thinner |
|
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2Suction Feed: 1.4-1.6mm 3-5kg/cm 2 |
|
|
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
2 years in original sealed can, cool and dry place at 25℃. |
|
|
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
Send product request
Other supplier products
 |
BYTF605-Epoxy Primer | Auto Coatings Product Name/Model：BYTF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,... |
 |
MF606-2K Primer Surfacer | 3、MF606-2K Primer Surfacer Automotive Paint company Product Name/Model:MF606-2K Primer Surfacer Characteristic: Multi-purpose two-component 2K... |
 |
BYTF609-Matting Agent | BYTF609-Matting Agent. Automotive Coatings China Product Name/Model;BYTF609-Matting Agent. Characteristic: Used to reduce the brightness of pa... |
 |
BC1K Solid Colors (Basecoat Colors) | BC1K Solid Colors (Basecoat Colors) Automotive Paints Supplier Product Name/Model:BC1K Solid Colors(Basecoat Colors) Characteristic:BC1K Solid Col... |
 |
MSD-0912 1K Binder and MSD-0920 Flip Controller | MSD-0912 1K Binder andMSD-0920 Flip Controller Automotive Refinish Coatings Product Name/Model:MSD-0912 1K Binder andMSD-0920 Flip Controller ... |
Same products
 |
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... |
 |
Exterior Wall Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... |
 |
DRINKING WATER TANK PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... |
 |
CHEMICAL PLANT PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a c... |
 |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion re... |
