BM1K Solid Colors (Basecoat Colors)
BM1K Solid Colors (Basecoat Colors)
Auto Coatings Manufacturers
Product Name/Model：BM1K Solid Colors (Basecoat Colors)
Characteristic:BM1K Solid Colorwith excellent leveling property,easy construction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
BM1k Solid Colors |
Thinner |
|
1 |
1 |
|
BM1k Solid Colors |
BYTX-1 Fast Thinner |
|
BM1k Solid Colors |
BYTX-2 Standard Thinner |
|
BM1k Solid Colors |
BYTX-3 Slow Thinner |
|
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2Suction Feed: 1.4-1.6mm 3-5kg/cm 2 |
|
|
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
2 years in original sealed can, cool and dry place at 25℃. |
|
|
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
在线联系供应商
Other supplier products
 |
BC1K Solid Colors (Basecoat Colors) | BC1K Solid Colors (Basecoat Colors) Automotive Paints Supplier Product Name/Model:BC1K Solid Colors(Basecoat Colors) Characteristic:BC1K Solid Col... |
 |
MF2K Solid Colors | 18、MF2K Solid Colors Refinish Automotive Paint Product Name/Model:MF2K Solid Colors Characteristic:MF2K Solid Colors, high gloss and build, good p... |
 |
F600-Plastic Primer | F600-Plastic Primer Automotive Paints Supplier Product Name/Model:F600-Plastic Primer Characteristic: Single-component transparent fast drying... |
 |
BYTF600-Plastic Primer | Auto Coatings Product Name/Model：BYTF600-Plastic Primer Characteristic: Single-component transparent fast drying primer, used to promote adhesion... |
 |
2K Series Hardener | 2K Series Hardener MARSIDE Series Product Name/Model:2K Series Hardener Characteristic: A series of yellow resistant hardener, designed for for 2K... |
Same products
 |
Parchment Paper Supplier | 卖方: Brightime Global Limited | Parchment Paper Supplier Parchment Paper , also known as baking paper, is a versatile kit... |
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
