BM2K Solid Colors
BM2K Solid Colors
Automotive Paints Exporter
Product Name/Model;BM2K Solid Colors
Characteristic;BM2K Solid Colors, high gloss and build, good performance of leveling property,easy construction, excellent pretective and coveraging power, long lasting bright color.Mainly applies to intermediate cars, MPV and bus.
|
Substrates |
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1Kor2k primer |
||||
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sandingwith P800-P1000, wash with clean water then keep dry; again with degreaser. |
||||
|
MixingRatio |
BM2K Solid Colors |
Hardener |
Thinner |
||
|
2 |
1 |
||||
|
＜15℃ |
BM2K Solid Colors |
210 Fast Hardener |
BYTX-1 Fast Thinner |
||
|
15-30℃ |
BM2K Solid Colors |
220 Standard Hardener |
BYTX-2 Standard Thinner |
||
|
＞30℃ |
BM2K Solid Colors |
230 Slow Hardener |
BYTX-3 Slow Thinner |
||
|
SprayViscosity |
16-19s to drop off, in 4# viscosity cup, at 25°C, |
||||
|
Pot-life |
At 25°C2 hours with fast hardener.4 hours with standardorslow hardener. |
||||
|
ReTreatment |
There are particlesorruns after spray, sand affected area with P2000 sand paper afterthorough drying, then polish to solve the problem. |
||||
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm 2Suction Feed: 1.4-1.6mm 3-5kg/cm 2 |
||||
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 35-50umFlash-Off Time: At 25°C, 5-10 minutes between two coats,Air-Drying Time: Allow 10-15 minutes air drying time before force drying |
||||
|
DryingTime |
Temperature |
Dust Free |
Tack Free |
Dry To Handle |
Dry To Test |
|
+25°C |
40 minutes |
2 hours |
9 hours |
6 Days |
|
|
+70°C |
5 minutes |
10 minutes |
25 minutes |
50 Minutes |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
||||
|
Package |
1L×12or3.75L×4 |
||||
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
Send product request
Other supplier products
 |
F600-Plastic Primer | F600-Plastic Primer Automotive Paints Supplier Product Name/Model:F600-Plastic Primer Characteristic: Single-component transparent fast drying... |
 |
BYTX-1/2/3/ Thinner | BYTX-1/2/3/ Thinner Car Paint Thinner Product Name/Model：BYTX-1/2/3/ Thinner Characteristic: High quality thinner, specially developed for pri... |
 |
BYTF608-Degreaser | BYTF608-Degreaser BOYET Series Product Name/Model:BYTF608-Degreaser Characteristic:Able to remove greaser, oil and other surface contamination... |
 |
MF2K Solid Colors | 18、MF2K Solid Colors Refinish Automotive Paint Product Name/Model:MF2K Solid Colors Characteristic:MF2K Solid Colors, high gloss and build, good p... |
 |
MF1K Silver Colors | MF1K Silver Colors Automotive Paint company Product Name/Model:MF1K Silver Colors Characteristic:MF1K Silver Color with excellent leveling p... |
