F606-2K Primer Surfacer
1、F606-2K Primer Surfacer
Automotive Paints Supplier
Product Name/Model:F606-2K Primer Surfacer
Characteristic: Multi-purpose two-component 2K Primer Surfacer with strong filling power andfine adhesion between coats, fast drying time, easy sanded.
Substrates |
Dried and sanded existing finishes, all kinds of primer and putty. |
||
SurfaceCleaning |
F606-2KPrimer Surfacer |
MSH106 2K PrimerHardener |
Thinner |
4 |
1 |
1~1.5 |
|
A 、<15℃ :90Fast Thinner; B 、 15-30℃:91 Standard Thinner; C、>30℃:92Slow Thinner |
|||
Pot-Life |
At 20°C, 3 hours mixed withhardener, thinner |
||
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
||
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 4-5kg/cm 2Suction Feed: 1.4-1.6mm 4-5kg/cm 2 |
||
SprayTechnology |
Coats&Thickness: 2-3 coats, total 20-30um.Flash-Off Time: At 25°C,5-10 minutes between two coats,it depends ontemperature and paint film. |
||
Drying Time |
|
||
Shelf Life |
2 years in original sealed can,cool and dry place at 25℃. |
||
Package |
1L×12or3.75L×4 |
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to becleaned after dry.
Send product request
Other supplier products
MF605-Epoxy Primer | MF605-Epoxy Primer Automotive Paint company Product Name/Model:MF605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... | |
F400-1K Primer Surfacer | 1、F400-1K Primer Surfacer Automotive Paints Supplier Product Name/Model:F400-1KPrimer Surfacer Characteristic: Fast drying one-component 1K Pr... | |
BYT 2K Series Hardener | BYT 2K Series Hardener Automotive Refinish Supplier Product Name/Model:BYT 2K Series Hardener Characteristic: A series of yellow resistant har... | |
MSD Series Thinner | MSD Series Thinner Car Refinish Paint Product Name/Model:MSD Series Thinner Characteristic: High quality thinner, specially developed for primer, ... | |
BM2K Solid Colors | BM2K Solid Colors Automotive Paints Exporter Product Name/Model;BM2K Solid Colors Characteristic;BM2K Solid Colors, high gloss and build, good... |
Same products
Fast Dry Alkyd Antirust Primer (Iron Red, Gray) | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The fast-drying alkyd anti-rust paint is composed of alkyd resin and anti-rust pigments. Its surf... | |
Exterior Wall Paint | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Weather Resistant Acrylic Exterior Latex Wall Paint is a premium quality, water based 100% acryli... | |
DRINKING WATER TANK PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It ... | |
CHEMICAL PLANT PAINT | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | The cooling tower is a large-scale reinforced concrete structure, which is mainly composed of a c... | |
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Seller: Tianjin Jinhai Special Coatings & Decoration Co., Ltd | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion re... |