MF1K Silver Colors
MF1K Silver Colors
Automotive Paint company
Product Name/Model:MF1K Silver Colors
Characteristic:MF1K Silver Color with excellent leveling property,easy construction,excellentadhesion power and coveraging power,can match all kinds of solid colors, metallic and pearleffect. Mainly applies to intermediate cars, MPV and bus.
|
Substrates |
Well-Sanded, Completely dried and good existing finishes as bellow:A original paint B. Old paint firm C. 1K or2k primer |
|
|
SurfaceCleaning |
Wash by warm soap, remove wax, silicon and other contaminations withdegreaser, sanding with P800-P1000, wash with clean water then keep dry;again with degreaser. |
|
|
MixingRatio |
MF1K Silver Color |
Thinner |
|
1 |
1 |
|
|
＜15℃ |
MF1K Silver Color |
60 Fast Thinner |
|
15-30℃ |
MF1K Silver Color |
61 Standard Thinner |
|
＞30℃ |
MF1K Silver Color |
62 Slow Thinner |
|
SprayViscosity |
14-16s to drop off, in 4# viscosity cup at 25°C, |
|
|
Re-Treatment |
After spray, allow 10-20 minutes air-drying time,then spray clear coat at once. |
|
|
Spray GunSet Up |
Gravity Feed: 1.2-1.5mm 3-5kg/cm ²Suction Feed: 1.4-1.6mm 3-5kg/cm ² |
|
|
SprayTechnology |
Coats&Thickness: 2-3 coats, total 15-20um.Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends ontemperature and paint film. |
|
|
Shelf Life |
2 years in original sealed can, cool and dry place at 25℃. |
|
|
Package |
1L×12or3.75L×4 |
|
Note:1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner toavoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.3. To avolid problems of mottlingorpoor adhesion, the metallic paint film should be 15-25um.
Send product request
Other supplier products
 |
BM1K Solid Colors (Basecoat Colors) | BM1K Solid Colors (Basecoat Colors) Auto Coatings Manufacturers Product Name/Model：BM1K Solid Colors (Basecoat Colors) Characteristic:BM1K Sol... |
 |
MSK-6000 Extra Fast Clear Coat | MSK-6000 Extra Fast Clear Coat Automotive Paints Supplier Product Name/Model:MSK-6000 Extra Fast Clear Coat. Characteristic: Extra fast drying... |
 |
F605-Epoxy Primer | 1、F605-Epoxy Primer Automotive Paints Supplier Product Name/Model:F605-Epoxy Primer Characteristic: Good fillibility, easy sanding, give excelle... |
 |
MF600-Plastic Primer | 3、MF600-Plastic Primer Automotive Paint company Product Name/Model:MF600-Plastic Primer Characteristic: Single-component transparent fast dryi... |
 |
MF1K Solid Colors (Basecoat Colors) | MF1K Solid Colors (Basecoat Colors) Refinish Automotive Paint Product Name/Model:MF1K Solid Colors (Basecoat Colors) Characteristic:MF1K Solid Col... |
