CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING
Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion resistance. It is well-matched with other intermediate paints and topcoats. It is mainly used in the anti-corrosion of steel structures, bridges, engineering equipment, and mechanical facilities.
However, some problems are often encountered during construction, and blistering of the paint film is one of them.
Coating blistering is a common coating defect in the construction of epoxy zinc-rich primer. It often occurs between the primer and the substrate, or between two coatings, and sometimes occurs in a single coating. There are large and small blisters. The size of the blisters usually depends on the adhesion strength to the substrate, or the bonding ability between the coatings, and the pressure in the blisters.
Causes of bubbles in epoxy zinc primer coating
The above points are the reasons why the epoxy zinc rich primer is prone to foaming when the construction personnel encounters such coating defects. According to the actual situation, a comprehensive analysis can be made and corresponding solutions can be made.
For more information about blistering defect in coating and china floor coating, please feel free to contact us!
There are many industrial paint companies, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Epoxy Shop Primer (Iron Red) | The epoxy shop primer paintis composed of iron oxide red, epoxy resin, anti-rust pigment, filler, solvent, etc. The paint is fast-drying. After 5-1... |
 |
FUXI ® CHLOROSULFONATED POLYETHYLENE PAINT | Under FUXI® brand, Jinhai Special industrial protective coatinghas developed our own formulation system, including epoxy, phenolic, alkyd, acry... |
 |
Epoxy Phenolic Finish | Epoxy phenolic paint is a two-component product, a special paint composed of epoxy resin, phenolic resin, pigment fillers, additives, solvents, etc... |
 |
Acrylic Polyurethane Finish | What Is Acrylic Polyurethane Acrylicpolyurethaneename,also called acrylic polyurethane enamel, is a two-component high decorative topcoat. Acrylic... |
|
|
CAUSES OF BUBBLES IN EPOXY ZINC-RICH PRIMER COATING | Epoxy zinc primer paintis widely used in industrial anti-corrosion and has excellent corrosion resistance. It is well-matched with other intermedia... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
