Natural black talcum powder for ceramic usage with low iron 0.08%
CERAMICS GRADE TALC POWDER
Technical Data Sheet
Item number LMME-CRA
Aftere calcined Whiteness ≥93％
SiO2 ≥61％
MgO ≥31％
CaO ≤0.5％
Fe2O3 ≤0.1％
Al2O3 ≤0.2％
- ℃) ≤ 6％
ACID SOLUBLE CALCIUM ≤0.4％
Moisture ≤0.2％
Passing through (45µm) ≥98％
Ceramic grade talc powder used for manufacturing atomised clay to ceramic tile body and glaze, electro technical porcelain, all kind of industrial, building, daily-use ceramic glaze, waterproof roll, waterproof paint and waterproof balm etc. Feature: high whiteness&brightness and stability at high temperature, but low iron and loss on ignition to allowing the production of blends and bodies free of dark dots , improve workability and avoid cracks.
Product Description: Talc is increasingly being used in the manufacture of art wares, jars, wall and floor tiles. It serves as a non-plastic ceramic material. The addition of talc in suitable proportions in the body of mixtures for porcelain, jars etc. prevents the crazing (cracking) effect on the glazes. The proportion of talc in the ceramic body may go up to 80%. It is valued for its refractoriness and stability, as well as extremely law shrinkage at high temperature. Talc converts into clino-enstatite at about 1300º C. Between 800ºC to 840ºC, the water molecules are driven off and talc dissociates into enstatite and amorphous silica without undergoing any change in shape, the shrinkage being 0.0005 inch only.
In the manufacture of ceramic goods required for the electrical industry, the talc should not contain more than 1.5% FeO and CaO.Steatite suitable for the manufacture of 'lava' insulators must he dense, compact, uniform and homogeneous in texture, free from any inclusion and parting planes. It should not contain CaO more than 1.5% and Fe2O3; more than 1%. The iron oxide is a colorant and gives the fired shapes an unattractive color. An increase of iron oxide above two per cent decreases the 'Q' value (ratio of reactance to resistance) and increases the dielectric constant. CaO imparts abrasiveness and usually a short vitrification range and sometimes a high firing shrinkage.
Send product request
Other supplier products
 |
high purity white quartz silica sand 99.99% for glass production price | Silica/Quartz Sand is processed from the high quality silica stone, through the process of coarse crushing, roasting, fine crushing, acid treatmen... |
 |
Metallurgy grade sintered magnesite with MgO 96% 97% for stainless steel | Dead Burned Magnesite (also known as Dead Burnt Magnesite) Dead burned magnesite is widely used as a basic refractory material. It is produced in ... |
 |
Refractory coatings grade/Fireproof magnesium oxide powder price | Magnesium oxide (MgO 75-98%) CAS No.: 1309-48-4 EINECS: 215-171-9 Magnesium oxide (MgO) varies in reactivity according to the temperature at whic... |
 |
Superfine nano talc powder 1250 - 5000 mesh for plastics and paints use | Paints grade nano talc powder Technical Data Sheet Item number LMME-PP58 LMME-PPS50 SiO2 ％≥ 56-58 50-54 MgO％≥ 30 30 CaO ％≤ 0... |
 |
oil driling grade barite powder price with API 4.2 4.25 | Barite Items: API Specification 13A: Test Result: BaSO4: 90.0% min 92.18% Density: 4.2g/ml min 4.23g/ml PH: 10max 8.56 Water Soluble (... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
