Natural black talcum powder for ceramic usage with low iron 0.08%
CERAMICS GRADE TALC POWDER
Technical Data Sheet
Item number LMME-CRA
Aftere calcined Whiteness ≥93％
SiO2 ≥61％
MgO ≥31％
CaO ≤0.5％
Fe2O3 ≤0.1％
Al2O3 ≤0.2％
- ℃) ≤ 6％
ACID SOLUBLE CALCIUM ≤0.4％
Moisture ≤0.2％
Passing through (45µm) ≥98％
Ceramic grade talc powder used for manufacturing atomised clay to ceramic tile body and glaze, electro technical porcelain, all kind of industrial, building, daily-use ceramic glaze, waterproof roll, waterproof paint and waterproof balm etc. Feature: high whiteness&brightness and stability at high temperature, but low iron and loss on ignition to allowing the production of blends and bodies free of dark dots , improve workability and avoid cracks.
Product Description: Talc is increasingly being used in the manufacture of art wares, jars, wall and floor tiles. It serves as a non-plastic ceramic material. The addition of talc in suitable proportions in the body of mixtures for porcelain, jars etc. prevents the crazing (cracking) effect on the glazes. The proportion of talc in the ceramic body may go up to 80%. It is valued for its refractoriness and stability, as well as extremely law shrinkage at high temperature. Talc converts into clino-enstatite at about 1300º C. Between 800ºC to 840ºC, the water molecules are driven off and talc dissociates into enstatite and amorphous silica without undergoing any change in shape, the shrinkage being 0.0005 inch only.
In the manufacture of ceramic goods required for the electrical industry, the talc should not contain more than 1.5% FeO and CaO.Steatite suitable for the manufacture of 'lava' insulators must he dense, compact, uniform and homogeneous in texture, free from any inclusion and parting planes. It should not contain CaO more than 1.5% and Fe2O3; more than 1%. The iron oxide is a colorant and gives the fired shapes an unattractive color. An increase of iron oxide above two per cent decreases the 'Q' value (ratio of reactance to resistance) and increases the dielectric constant. CaO imparts abrasiveness and usually a short vitrification range and sometimes a high firing shrinkage.
在线联系供应商
Other supplier products
 |
High temperature electrical grade magnesium oxide (mgo) for heating element | High Temperature Magnesia Powder Our High Temperature Magnesia Powder is made of fused magnesium that contains more than 98% MgO, firstly grinned... |
 |
Water treatment grade brucite powder MgO 64% 62% 60% price | Bruicte Item number MgO SiO2 CaO Fe2O3 Al2O3 L.O.I Size LMME-58BRU58% 8% 5% 2.5% 1% 31% 80-325mesh LMME-60BRU60% 7% 4% 2.0% 1% 31% 80-... |
 |
monohydrate and heptahydrate magnesium sulphate/sulfate MgSO4 price | MAGNESIUM SULPHATE HEPTAHYDRATE Test ItemStandard Result Appearance White Crystal Complies Main Content≥% 99.5 99.74 MgO≥% 16.2 16.23 S... |
 |
Dead Brunt Magnesite MgO 90% 95% 96% producers for industrial use | Dead Burned Magnesite (also known as Dead Burnt Magnesite) Dead burned magnesite is widely used as a basic refractory material. It is produced in ... |
 |
Natural sculpture engraving carving grade talc lumps and stone | SCULPTURES (CARVING) TALC LUMP Technical Data Sheet Item number LMME-SCP-PINK LMME-SCP-Grey LMME-SCP-Blue Size 50-300mm 50-300mm 50-300mm ... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
