99.9% Ultra-fine Chromium Carbide Powder
Thermal spray powder material, grain growth inhibitor for sintering WC/Co hard metals and corrosion resistant components and etc...Chromium Carbide is a kind of high melting point inorganic material under 1000-1100 degrees, which has a good wear-corrosion resistance, oxidation resistance characteristics. Cr3C2 as radical with NiCr, and mixed in high temperature to be NiCr-Cr3C2 powder, can be a perfect wear-corrosion resistance thermal spraying material. Adding Cr3C2 into the hard metals, it not only can refine WC grain, but also can improve alloy's tensile strength and hardness, and can significantly improve corrosion resistance.
Send product request
Other supplier products
 |
Titanium carbide hard alloy guide wheel with strong load-bearing capacity | The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring... |
 |
Surface finish Ra≤0.2μm Titanium carbide alloy bar | Titanium carbide alloy bar is an alloy bar with titanium carbide as the main component, combining high hardness, wear-resistant properties, good ... |
 |
Industrial-grade titanium carbide rods have precise dimensions | Titanium carbide round rods made of hard alloy have excellent electrical conductivity and can be used to make electrodes for electrical discharge m... |
 |
High temperature resistant chromium carbide powder | Chromium carbide powder is a grey or black powdery inorganic compound, mainly composed of chromium and carbon elements, the chemical formula is C... |
 |
Hard alloy titanium carbide guide wheel - durable | This type of guide wheel has extremely strong corrosion resistance. It can be used for more than five years without rusting in a humid environment ... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
