Epoxy-polyester powder coating MT-APA EL286A/MT- EL286A
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
MT-APA is an epoxy-polyester powder coating primer especially designed for direct application on substrates that are sensitive to out-gassing, such as Hot Dip Galvanized steel, Metal spraying, Zamak, Cast steel, Aluminium, brass etc. MT-APA offers excellent flow, chemical and salt spray resistance, and resistance to mechanical damage. MT-APA is suitable for use as a primer for a variety of liquid topcoats, however it is recommended that pre-qualification tests for intercoat adhesion be carried out prior to use.
Powder Properties
| Appearance | Smooth |
| Chemical type | Epoxy-Polyester |
| Color | Grey |
| Recommended Film Thickness (µm) | 50 - 80 µm |
| Density (g/cm3) | 1.68 ± 0.03 g/cm³ |
| Application | Electrostatic |
| Storage | Under dry, cool (≤ 25°C) conditions |
| Shelf life | 24 months below 25ºC |
Pretreatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT-APA. The pre-treatment should be used in accordance with the supplier's recommendations.
a) Aluminium Multistage chrome chromate or chrome phosphate
b) Galvanised Steel Multistage zinc phosphate or chromate
c) Steel Multistage zinc or iron phosphate
Application
MT-APA is suitable for corona electrostatic spraying. Tribo application is not recommended.
| Recommended film thickness | 50-80 µm, good protection is linked with the recommended film thickness. |
| Recycling | Unused powder can be reclaimed using suitable equipment and recycled through the coating system, but a minimum of 70% new powder should be used. |
Note: Failure to comply with the recommended curing conditions may affect the adhesion of the topcoat and cause degradation of the system performance properties. Parts coated with MT-APA should not be handled if possible. If handling is unavoidable, clean lint-free gloves must be worn.
Send product request
Other supplier products
 |
Household electrical appliances powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Brief description: Made of epoxy polyester mixed type, Primid polyester type, TGIC poly... |
 |
Polyurethane powder coating series | Introduction： Made of hydroxy polyester resin and isocyanate curing agent as the main raw materials. Features: –Good adhesion, good mechan... |
 |
MDF Powder Coating | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are harmful to the environment -Energy saving,low cu... |
 |
560℃ High Gloss Mirror Chrome and Metallic Bonding Powder Coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction: This series of products is by using the advanced Bonding technology equip... |
 |
Cyclobutane-1,2,3,4-tetracarboxylic dianhydride CAS 4415-87-6 | Nature: WA：+86 132 6275 2056 WEB: std-coatings.com tetrahydrocyclobuta[1.2-c:3.4-c ′] difuran-1.3.4.6-tetraone is a solid compound, and ... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
