Automotive headlamp reflectors powder coating MT-A1270/MT-HZG04R
WA：+86 132 6275 2056
WEB: std-coatings.com
Product Description
The visual effect achieved from the final headlamp reflector is of the utmost importance and a quality powder primer is the key. The powder coating covers defects in the fabricated part and provides a smooth, corrosion resistant and high reflection finish for the vacuum metallization process. MT-A1270 is an epoxy coating for the application to headlamp reflector casing to provide corrosion protection with a high degree of smoothness in a thin film, prior to the process of metallization under vacuum.
Powder Properties
| Chemical Type | Epoxy |
| Area of usage | Automotive headlamp reflectors |
| Particle Size Distributon |
D50 = 26 – 32 µm Sympatec laser D50 = 30 – 36 µm Malvern laser |
| Appearance | Extremely smooth, high gloss |
| Colour | Clear-brown |
| Gloss (60°) | 100 - 120 GU |
| Density (g/cm3) | 1.10 ± 0.10 |
| Gel time at 200°C | 80 – 95 sec. |
| Post cure conditions | 240°C object temperature, 30 minutes holding time (Variations due to oven conditions can be possible but it must be assured by the applicator that it works in his system) |
| Application | Electrostatic |
| Storage Stability | under dry, cool (<23°C) conditions, at least 6 months from production date |
Test Conditions
The results are based on mechanical and chemical tests which (unless otherwise indicated) have been carried out under laboratory conditions and are given for guidance only. Actual product performance will depend upon the circumstances under which the product is used.
| Substrate | Steel panels |
| Pretreatment | Bonder (WH/60/OC) iron phosphate |
| Film thickness | 40 - 60 µm |
| Cure schedule | 30 minutes 240°C, post cure |
Mechanical Tests
|
Adhesion |
DIN EN ISO 2409 | Gt 0 |
| Hardness | DIN EN ISO 2818 | ≥ 125 |
Pre-treatment
Steel surfaces to be coated must be clean and free from grease. For maximum protection it is essential to pre-treat components prior to the application of MT-A1270. Iron Phosphate and Zinc Phosphate of ferrous metals improve corrosion resistance.
Application
MT-A1270 powders can be applied by manual or automatic electrostatic spray equipment. It is recommended that for consistent application and appearance product be fluidized during application.
Send product request
Other supplier products
 |
Powder coating series for vehicle compartment | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com With the development of environmental protection and energy conservation, the central e... |
 |
Polyester based powder coating MT-MA010G White | WA：+86 132 6275 2056 WEB: std-coatings.com Product Description MT-MA010G is a polyester based powder coating, formulated without TGIC and is d... |
 |
Fluorocarbon powder coating | Introduction Standard fluorocarbon powder coating is a 100% solid powder coating with fluorine-containing resin as the main film-forming material.... |
 |
Epoxy Anti-Corrosion Powder Coating for Coal Mine Gas Drainage Pipes | Product Introduction: This product is formulated using phenolic epoxy resin and incorporates self-developed conductive polymers and conductive mat... |
 |
Polyurethane primer powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product Description The one-component primer can improve the surface condition of t... |
Same products
 |
Metallic flat high gloss Powder Coating MT-049/98010 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | Seller: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
