Fluxes for Aluminum Alloy
General Description:
Aluminum alloys containing more than 2 % magnesium become brittle with sodium.
Feature: This low sodium refining fluxis a compact covering and cleaning granulated flux to remove the sodium in the aluminum melting. It generates low dust and low fume during application. It reacts quickly with molten aluminum and removes the alkali metal (Ca, Na, Li, Sr) and non-metallic inclusions (oxides, carbides, borides) and degassing.
Function:
After fusing completed the flux are cooled and they are crushed or ground into ccustomerized particle size.
degassing when injected flux with Argon or Nitrogen.
Applied range:
This no sodium refining fluxis used in hypo-eutectic aluminum alloys including those contain high magnesium alloy.
Chemical compositions
Mgcl2 Anhydrous , Potassium Chloride , CaF2 and other salt
Melting Point: 432°C & 483°C
Size of Sodium-Free Refining Flux
Granule 0.8-3.25mm, 1-3mm,Other size can be adjusted according to custom
Package: 1. 2.0kg or 2.5kg or 5kg heat sealed polyethylene (PE) bags into 20 or 25kgs bags or cartons with or without pallet
Advantage:
1) Eco‐friendly flux that reduce dust levels, meet the emission limits of most environmental regulatory agencies
2) Uniform size, reacts fully. Purify the melt improve melt quality.
3) Increases the extrusion speed and die life when extruding profiles
4) Reduces the number of breaks in continuous casting
5) Eliminates edge cracks when rolling high Mg aluminium alloys
6) Free of fluorides. Zero fluoride emissions.
7) Low melting point for rapid dispersion
8) Low application rates, typical 0.15-0.2% of MT aluminium
Notice:
Sodium-free flux should be added to the melt at the temperature of 690-750 Degree Celcius. The recommended application rate should be 0.1 to 0.2% of the melt size. Rebel the melt and remove the dross from the top of the molten metal.
Jinzhou Sata Fused Fluxes and New Materials Factory (SATA for short), is a professional aluminium covering fluxindustry with integrated capability of product research & development, manufacture, business management and services.If you want to know more details, just feel free to contact us!
Send product request
Other supplier products
 |
Magnesium Chloride Anhydrous | Anhydrous magnesium chloride is our main raw materials for producing foundry fluxes, it is a byproduct of titanium sponge from the three largest ti... |
 |
Mg Remover Flux | General Introduction: Magnesium plays a very important part in producing the required physical properties of many , its presence in others is not r... |
 |
Cover Flux | Cover Flux (SATA-PF-340) General Description of Cover Flux (SATA-PF-340) The cover flux aluminiummelt is extremely easy oxidation and inhale when ... |
 |
Potassium Aluminium Fluoride (PAF) | Potassium Aluminium Fluoride (PAF) General Description ofPotassium Aluminium Fluoride(PAF) Molecular Formula: KALF4 /K3ALF6 CAS NO.:14484-69-6 Melt... |
 |
Covering Flux-Csf1 | C sf1is fused flux which does not contain any form of sodium salt and does not cause the alloy to be brittle, suitable for all kinds of aluminum an... |
