Dimethyl Lauryl/myristyl Amine CAS 84649-84-3
Introduction
| Chemical Name | Dimethyl Lauryl/myristyl Amine |
| Product Category | Fatty Tertiary Amine |
| CAS No. | 84649-84-3 |
| Content | 98% |
| Packing | 160kg/drum 800kg/IBC |
84649-84-3 – Names and Identifiers
| Name | Amines, C12-14-alkyldimethyl |
| Synonyms | DMA1270 DMA1265 DMA1263 Amines, C12-14-alkyldimethyl |
| CAS | 84649-84-3 |
| EINECS | 283-464-9 |
84649-84-3 – Physico-chemical Properties
| Use | Pyrazole, a derivative of pyrazole, is an important intermediate in medicine and dyes. |
84649-84-3 – Risk and Safety
| UN IDs | 2735 |
| Hazard Class | 8 |
| Packing Group | III |
84649-84-3 – Introduction
Amines, C12-14-alkyldimethyl, also known as C12-14-alkyl dimethyl tertiary amine or C12-14-alkyldimethylamin, is an alkyl dimethyl tertiary amine compound.
Nature:
-Appearance Colorless or light yellow liquid
-has a special amine odor
-has good solubility, soluble in water and organic solvents
-Non-ionic surfactant
-has a good effect on the interfacial tension of water
Use:
-Mainly used as surfactant and emulsifier
-Widely used in detergents, cleaners, softeners, and emulsifiers in industry and agriculture
-Can also be used for metal and plastic treatment agents, paper moisturizers and skin care products
Preparation Method:
Amines, the preparation of C12-14-alkyldimethyl is usually completed by alkylation reaction and nucleophilic substitution reaction. First, octane diolefin or dodecanol is reacted with a methyl tertiary amine to obtain an intermediate alkyl dimethyl tertiary amine. The intermediate is then reacted with tert-butanol hydrochloride to yield the final product Amines, C12-14-alkyldimethyl.
Safety Information:
– Amines, C12-14-alkyldimethyl is a chemical and should be used in accordance with safe operating procedures
-Avoid skin contact and inhalation of gas or mist when in contact
-Prolonged or heavy exposure may cause skin and eye irritation
-Should be stored in a cool, dry place, away from fire and oxidizing agents
-Wear protective glasses and gloves during use, and maintain good ventilation
Send product request
Other supplier products
 |
Methylated Urinary Aldehyde Resin | Introduction Methylated Urinary Aldehyde Resin: Properties and Applications Table 1: Key Characteristics of Methylated Urinary Aldehyde Resin ... |
 |
Diethylene Glycol Monobutyl Ether Acetate CAS 124-17-4 | Introduction Ethylene glycol butyl ether acetate is a high boiling point, multifunctional binary alcohol ether ester solvent, which can be use... |
 |
Sealing application adhesive | Polyurethane and epoxy resin materials, different models of products can provide targeted insulation strength, flame retardant performance, excelle... |
 |
CAS 98327-87-8 | BINAP 1.1′-Binaphthyl-2.2′-diphemyl phosphine CAS 98327-87-8 Product Number B2383 Purity / Analysis Method >97.0%(GC) ... |
 |
Substrate wetting additive STD-204E | Introduction Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene ... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
