Non Modified Cellulose Ether
Introduction
Non Modified Cellulose Ether
To improve the workability properties of Portland cement and gypsum based dry mortars, such as plaster, render, tile adhesive and EIFS mortar.
Storage
Non Modified Cellulose Ether is non-perishable product. It is recommended to use the products in rotating on a first in first out basis. The products should be stored under dry and clean conditions in its original packaging and away from heat.The products are hydroscopic. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.
Product safety
According to the EU legislation on dangerous substances and preparations, Non Modified Cellulose Ether is not hazardous. Further data on the safety aspects of Non Modified Cellulose Ether types are given in the Safety Data Sheets.
Customer notice and Disclaimer
The products and related information provided by MT are for manufacturing use only. MT makes no express, implied, or other representation, warranty, or guarantee concerning.
(I) the handling, use, or application of such products, whether alone, in combination with other products, or otherwise,
(II) the completeness, definitiveness, or adequacy of such information for user’s or other purpose,
(III) the quality of such products, except that such products are of MT’s standard quality. Users are advised to make their own tests to determine the safety and suitability of each such product combination for their own purpose. Read and understand the Material Safety Data Sheet (MSDS) before using this product. MT does not recommend any use of its products that would violate ant patent or other rights.
Send product request
Other supplier products
 |
Silicone and modified silane | Introduction Silicone and modified silane are adhesives with moderate adhesive strength, high flexibility, and low hardness, mainly used for b... |
 |
Dispersants STD-5041 | Introduction Composition: Copolymer solution containing pigment-friendly groups Appearance: brownish yellow transparent solution Active ingredie... |
 |
Modified Silane Sealant | Introduction MT-667is a single component sealant based on silane modified polymer, which solidifies into an elastomer by reacting with moisture an... |
 |
Leveling agent STD-2041 | Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: None Application range: ... |
 |
Three proof adhesive | Three proof adhesive,also known as circuit board protective adhesive or coating adhesive, is applied to the surface of the circuit board to form a ... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
