CAS 872-85-5
4-Pyridinecarboxaldehyde CAS 872-85-5
CAS Number: 872-85-5
Molecular Formula: C6H5NO
Molecular Weight: 107.11 g/mol
Appearance: Clear brown-yellow liquid
Melting Point: -4 to -2 °C
Boiling Point: 71-73 °C at 10 mmHg
Usage: Widely used in organic synthesis, particularly in the pharmaceutical and pesticide industries.
| Purity / Analysis Method | >96.0%(GC) |
| Molecular Formula / Molecular Weight | C6H5NO= 107.11 |
| Physical State (20 deg.C) | Liquid |
| Storage Temperature | Room Temperature (Recommended in a cool and dark place, <15°C) |
| Store Under Inert Gas | Store under inert gas |
| Condition to Avoid | Light Sensitive,Air Sensitive |
| CAS RN | 872-85-5 |
Specifications
| Purity(GC) | min. 96.0 % |
Properties (reference)
| Boiling Point | 187 °C |
| Flash point | 75 °C |
| Specific Gravity (20/20) | 1.14 |
| Refractive Index | 1.54 |
Send product request
Other supplier products
 |
Automotive Interior – Polyolefin Hot Melt Adhesive | Polyolefin Hot Melt Adhesive in Automotive Interiors: A Comprehensive Overview Polyolefin hot melt adhesives (HMAs) are a vital component in the a... |
 |
Substrate wetting additive STD-204E | Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene glycol Applic... |
 |
Three proof adhesive | Introduction Three proof adhesive,also known as circuit board protective adhesive or coating adhesive, is applied to the surface of the circuit bo... |
 |
Modified Silane Sealant | Introduction MT-667is a single component sealant based on silane modified polymer, which solidifies into an elastomer by reacting with moisture an... |
 |
Camera adhesive | Introduction With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for came... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
