CAS 110-12-3 Methyl Isoamyl Ketone (MIAK)
Names and Identifiers
| Name | 5-Methyl-2-hexanone |
| CAS | 110-12-3 |
| EINECS | 203-737-8 |
| InChI | InChI=1/C8H9BrO/c/h1-5,8,10H,6H2/t8-/m0/s1 |
Physico-chemical Properties
| Molecular Formula | C7H14O |
| Molar Mass | 114.19 |
| Density | 0.814 g/mL at 25 °C (lit.) |
| Melting Point | -74 °C |
| Boling Point | 145 °C (lit.) |
| Flash Point | 106°F |
| Water Solubility | 5.4 g/L (20 ºC) |
| Solubility | water: soluble5.4g/L at 25°C |
| Vapor Presure | 4.5 mm Hg ( 20 °C) |
| Vapor Density | 3.94 (vs air) |
| Appearance | Liquid |
| Color | Clear colorless |
| Exposure Limit | TLV-TWA 240 mg/m3 (50 ppm) (ACGIH). |
| BRN | 506163 |
| Storage Condition | Store below +30°C. |
| Explosive Limit | 1.35-8.2%, 93°F |
| Refractive Index | n20/D 1.406(lit.) |
Applications：
Auto OEM
Auto refinish
General industrial coatings
Paints & coatings
Process solvents
Key attributes：
Excellent solvent activity
High dilution ratio
Inert – Nonfood use
Low density
Low surface tension
Non-HAP
Non-SARA
REACH compliant
Readily biodegradable
Slow evaporation rate
Urethane grade
Send product request
Other supplier products
 |
UV Light Curing Adhesive | Introduction UV curable adhesive is a structural bonding adhesive that solidifies by irradiating UV light. The characteristic of UV curable adhes... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
Substrate wetting additive STD-249 | Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: NoneScope of Application: ... |
 |
Automotive Interior – Water based Adhesive | The series of water-based adhesive products include two-component water-based polyurethane adhesive, which is widely used in the field of automotiv... |
 |
Rheology modifier STD-9010 | Composition: Polyurea mixture solution Appearance: yellow transparent solution Active ingredient: 50% Solvent: N-methylpyrrolidoneScope of Appli... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
