MBTS (DM) CAS 120-78-5 Accelerator
Introduction
Chemical Name:Dibenzothiazole disulfide
CAS NO.:120-78-5
Product Specification:
| Appearance | Grayish white to yellowish powder or particle | |
| Purity,% | ≥ | 95.0 |
| Melting Point(Initial),°C | ≥ | 164.0 |
| Heat Loss,% | ≤ | 0.40 |
| Ash,% | ≤ | 0.50 |
| Residue on sieve(150μm),% | ≤ | 0.10 |
| Free MBT,% | ≤ | 1.0 |
◆Performance:Siceler MBTS is a thiazole accelerator with significant delayed action, with high vulcanization temperature and high safe processing. The vulcanization speed is relatively slow if used alone, and is usually combined with dithiocarbamates, thiuram, aldehyde amines and guanidine accelerators.
◆Application:Siceler MBTS is used as a universal accelerator for natural rubber, synthetic rubber and reclaimed rubber, and can be used for manufacturing tires, rubber tubes, rubber belt and general industrial rubber products.
◆Packaging:Paper/plastic packages with a net weight of 20kg per package.Or FIBC with a net weight 500kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine, rain and long-term extrusion，keeping away from hot source.
120-78-5 –Risk and Safety
| Hazard Symbols | Xi – Irritant N – Dangerous for the environment |
| Risk Codes | R31 – Contact with acids liberates toxic gas R43 – May cause sensitization by skin contact R50/53 – Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | S36/37 – Wear suitable protective clothing and gloves. S60 – This material and its container must be disposed of as hazardous waste. S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 3077 |
120-78-5 –Upstream Downstream Industry
| Raw Materials | Aniline Sodium hypochlorite 2-Mercaptobenzothiazole Carbon disulfide Toluene Sulfur(α) Sulfuric acid Chlorine Sodium hydroxide Sodium nitrite Ammonia |
Send product request
Other supplier products
 |
High boiling aromatic hydrocarbon solvent | Introduction High boiling point aromatic hydrocarbon solvent than the traditional toluene, xylene little toxicity, Flash point is high, use and tr... |
 |
Substrate wetting additive STD-249 | Introduction Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: None Scope ... |
 |
Benzyl Chloride CAS 100-44-7 | Properties and Applications 1.1 Molecular formula, Molecular weight, Structural formula and CAS No. Molecular formula: C7H7Cl Molecular weight: ... |
 |
Butylated Urea Formaldehyde Resin | Butylated Urea-Formaldehyde Resin(BUF) is a modified product of urea-formaldehyde resin (synthesized by the polycondensation of urea and formaldehy... |
 |
A7750 CAS 3081-14-9 | 3081-14-9 –Names and Identifiers Name N,N’-BIS(1,4-DIMETHYLPENTYL)-P-PHENYLENEDIAMINE Synonyms 77PDUnilink 7100Vulkanox 4... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
