Camera adhesive
Introduction
With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for camera modules in the consumer electronics and automotive markets has significantly increased, and the demand for adhesive parameters in this application is also constantly increasing. The camera module has extremely high requirements for the precipitation, strength, aging resistance, as well as the morphological changes, thermal expansion changes, and curing efficiency of the adhesive after curing. For example, the lens part has good temperature resistance, light resistance, and aging resistance when in contact with the outside for a long time, and the precipitation rate is strictly controlled to avoid contaminating the lens and affecting imaging.
Camera module is one of the key industries that Hansi Electronics focuses on and invests in. In response to this market, Hansi Electronics continues to invest in research and development, as well as technological resources for innovation. We can provide comprehensive camera module bonding solutions, including lens holder alignment, filter bonding, lens bonding, barrel bonding, lens holder bonding, FPC reinforcement, VCM motor bonding, including UV glue, UV thermosetting, low-temperature epoxy and other technical categories.
| Property | Camera Adhesive |
|---|---|
| Composition | Epoxy or acrylic-based formulations with low shrinkage and high thermal stability. |
| Curing Method | UV/LED curing or thermal curing (heat-activated). |
| Key Applications | Bonding camera lenses, image sensors, and modules; securing components in high-precision assemblies. |
| Advantages | High bond strength, resistance to thermal cycling/vibration, low outgassing (NASA ASTM E595 compliant). |
| Limitations | Brittle if not properly formulated; requires precise application for optical alignment. |
| Industry Use | Critical in smart, automotive, and aerospace camera modules for reliability. |
Notes:
UV-Curable Adhesives: Enable rapid processing in manufacturing, often used for active alignment applications.
Thermal Stability: Ensures consistent performance in temperature-sensitive camera environments.
Low Outgassing: Important for vacuum-sealed or sensitive optical components to prevent contamination.
Send product request
Other supplier products
 |
CAS 4415-87-6 | Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1... |
 |
Butylated Melamine Resin | Introduction This category of products is mainly composed of n-butanol, isobutanol, and hydroxymethyl melamine, which react in different molar rat... |
 |
Acrylic polyol resin MT-7152-80 | Introduction Characterization Acrylic polyol resin designed for high solid low VOC ACE top coating Form supplied Form supplied is approxima... |
 |
Hydroxymethyl | Introduction This type of product is mainly made by hydroxymethylation reaction of melamine and formaldehyde with different molar ratios. The fini... |
 |
Butylated Urea Formaldehyde Resin | Butylated Urea-Formaldehyde Resin(BUF) is a modified product of urea-formaldehyde resin (synthesized by the polycondensation of urea and formaldehy... |
Same products
 |
4,4′-oxydiphthalic Anhydride(ODPA) CAS 1823-59-2 | Seller: Standard International Group (HK) Limited | Introduction 4,4 ‘-oxybis-phthalic anhydride is a white to white powder organic substance ... |
 |
Composite Material – Acrylic Instant Drying Adhesive | Seller: Standard International Group (HK) Limited | MT941/MT912/MT994 series: One component quick curing, solvent-free cyanoacrylate adhesive. The p... |
 |
2K-MMA two-component acrylic adhesive | Seller: Standard International Group (HK) Limited | 2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bondi... |
 |
Adhesive for optical communication | Seller: Standard International Group (HK) Limited | In the field of fiber optic assembly industry, our product line includes single/two-component epo... |
|
|
Camera adhesive | Seller: Standard International Group (HK) Limited | Introduction With the increasing demand for consumer electronics and the development of auto... |
