Durable polyester powder coatings
Product Description
MT Autobody powder coating isa series of durable polyester powder coatings designed for application onto automotive components. Ithas been designed to display excellent protective properties including corrosion, humidity, chip resistance, acid spotting and resistance to weathering over suitably pre-treated substrates.
Powder Properties
| Chemical type | TGIC-free Polyester |
| Particle size | Suitable for electrostatic spray |
| Specific gravity | 1.2 - 1.7 depending on colours |
| Storage | Dry cool conditions (below 30°C) |
| Shelf Life | 12 months |
| Stoving Schedule | 10 mins at 200°C |
Mechanical Tests
| Flexibility | (Bend Test) AS1580 402.1 | Pass 3mm |
| Adhesion | (2mm Crosshatch) AS1580 408.4 | Classification 1 maximum |
| Erichsen Cupping | BS3900-E4 | Pass > 3mm |
| Pencil Hardness | AS1580 405.1 | 1F – minimum |
| Reverse Impact | AS3715 Section 2.5.8 | Pass <=20InP |
Pre-treatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT Autobody. The pre-treatment should be used in accordance with the supplier's recommendations.
A. Aluminium: Multistage chrome chromate or chrome phosphate.
B. Galvanised Steel: Multistage zinc phosphate or chromate.
C. Steel: Grit blast to SA 2.5. 20-40µm blast profile, followed by multistage zinc or iron phosphate.
Application
MT Autobody powder coatings can be applied by manual or automatic electrostatic spray equipment. Unused or over-sprayed powder coating can be reclaimed and recycled through the coating system.
Send product request
Other supplier products
 |
hydroxyfunctional polyacrylic dispersion (MT-A-145) | Characterization MT-A-145 is a water-reducible, hydroxyfunctional polyacrylic dispersion.It is suitable for use in combination with aliphatic poly... |
 |
Printing Ink Coloring | Introduction The series of colorants are characterized by their excellent water solubility, smoothness, non-clogging nature, migration resistance,... |
 |
Aliphatic polyisocyanate (flexibilizing HDI trimer)-MT3800 | Characterization MT3800 is an aliphatic polyisocyanate (flexibilizing HDI trimer).It is suitable for use as the hardener component for lightfast p... |
 |
Industrial formaldehyde | Introduction Formaldehyde, chemical formula or HCHO or CH2O, formula 30.03. also known as ant aldehyde, explosion limit: 7.0-73%. It has a strong ... |
 |
Hydrophilic aliphatic polyisocyanate (MT 307/1) | Introduction Characterization Hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). Hardener for waterborne two-compon... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
