Durable polyester powder coatings
Product Description
MT Autobody powder coating isa series of durable polyester powder coatings designed for application onto automotive components. Ithas been designed to display excellent protective properties including corrosion, humidity, chip resistance, acid spotting and resistance to weathering over suitably pre-treated substrates.
Powder Properties
| Chemical type | TGIC-free Polyester |
| Particle size | Suitable for electrostatic spray |
| Specific gravity | 1.2 - 1.7 depending on colours |
| Storage | Dry cool conditions (below 30°C) |
| Shelf Life | 12 months |
| Stoving Schedule | 10 mins at 200°C |
Mechanical Tests
| Flexibility | (Bend Test) AS1580 402.1 | Pass 3mm |
| Adhesion | (2mm Crosshatch) AS1580 408.4 | Classification 1 maximum |
| Erichsen Cupping | BS3900-E4 | Pass > 3mm |
| Pencil Hardness | AS1580 405.1 | 1F – minimum |
| Reverse Impact | AS3715 Section 2.5.8 | Pass <=20InP |
Pre-treatment
For optimum coating performance the following pre-treatment is recommended prior to the application of MT Autobody. The pre-treatment should be used in accordance with the supplier's recommendations.
A. Aluminium: Multistage chrome chromate or chrome phosphate.
B. Galvanised Steel: Multistage zinc phosphate or chromate.
C. Steel: Grit blast to SA 2.5. 20-40µm blast profile, followed by multistage zinc or iron phosphate.
Application
MT Autobody powder coatings can be applied by manual or automatic electrostatic spray equipment. Unused or over-sprayed powder coating can be reclaimed and recycled through the coating system.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Sealing application adhesive | Introduction Polyurethane and epoxy resin materials, different models of products can provide targeted insulation strength, flame retardant perfor... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
Benzyl Chloride CAS 100-44-7 | Introduction Properties and Applications 1.1 Molecular formula, Molecular weight, Structural formula and CAS No. Molecular formula: C7H7Cl Mole... |
 |
Polyester based powder coating white | Product Description MT-MA010G is a polyester based powder coating, formulated without TGIC and is designed for exterior exposure offering excellen... |
 |
Adhesion promoters STD-7266 | Composition: Special polyester copolymer Appearance: light yellow viscous liquid Active ingredient: 60% Solvent: Mixed dibasic estersApplication... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
