红叶硅铂系列硅橡胶食品模具制作

供应商:

供应产品

silicon Platinum series silicone rubber for food moulds making

 

.jpg

  

Applications of silicon Platinum series silicone rubber for food moulds making

Silicon rubber for ceiling roses mold making,gypsum mold and crafts,PU/poly resin, unsaturated resin, plaster, candles and gypsums crafts, 

toys, soap, statuary ,casting molds making, etc.

.jpg

Technique Data of silicon Platinum series silicone rubber for food moulds making

 Model  625# Blustar3325  Dowcorning3481

Mixing proportion of catalyst(standard )

100/5

100/5

100/5

Hardness (A°) 

25 25 25

Density ( g/cm 3 )

1.12 1.2 1.2
Pot life  23°C

 

 30 mins  90-150min  90min
 De-mold time  5-6h  24h  24h
 

Viscosity (25 C°,mPa.s)

 17000-19000  35000  23000
 Color  Adjustable  /  white
 Tear-strength  

≥25 (KN/m)

 

21 (KN/m)

 

≥23(KN/m)

 

Tensile strength (N/mm²)

 3  4  4
 

Elongation-break (%)

 

≥ 400

 450  450

 Operating techniques of silicon Platinum series silicone rubber for food moulds making

1. Stir the base (Part A) well beofre use (except when depending on machine ).

2. Shake the catalyst container (Part B) well before use.

3. This is a 100 Part A to 5 Part B mixing ratio by weight.Weigh the desire amount of base into a clean mixing container.

4. Weight the proper amount of catalyst into the container. Mix the base and catalyst together by stirring with a stick until a uniform color is obtained. Scrape the container walls and bottom well to insure a thorough mix.

5. Though it is often unnecessary to deair the material due to its low viscosity some may choose to do so. If so,place the container into a vacuum chamber and evacuate the entrapped air from the mixture using a vacuum pump capable of achieving 29 inches of mercury vacuum.The mixture will rise, crest and then collapse in the contanier. Interruption(bumping) of the vacuum may be necessary to prevent overflowing the container. Keep the mixture under full vacuum for 2-3 minutes.

6. Bleed air slowly into the vacuum chamber. When the chamber is at atmospheric equiplibrium,remove the cover plate and take out the container.

7. Pour the deaired material slowly in a steady stream from one end of the mould so that the material flows evenly over the pattern. This should minimize emtrapment of air bubbles under the flowing material. Areadymold may be poured firstly over the pattern, which will also help reduce the possibility of entrapping air on the pattern and in the cured rubber.A mold release agent may be applied on the pattern first to improve release.

Allow the rubber to cure for 2-4 hours at 24C

.jpg

 

 Shelf life of silicon Platinum series silicone rubber for food moulds making

 

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

Company Information

small.jpg   welcome to Shenzhen Hong Ye Jie Technology Co.,Ltd 
R0DHBGI5P_UD4JQPW{8{9Y8.png

Annual Production Capacity(Last Year) Verified
Product NameProduction Line CapacityActual Units Produced(Previous Year)
Molding Silicone Rubber 300 Tons/Month confidential
Pad Printing Silicone Rubber 100 Tons/Month confidential
Injection Silicone Rubber 50 Tons/Month confidential
Electronic Potting Silicone Rubber 50 Tons/Month confidential
Addition Cure Liquid Silicone 100 Tons/Month confidential

 

Sample

As usual,we will offer 1KG sample for your test,and send to you by UPS,it about 3-5 days to your door.if need,pls feel free contact with me, Belami will arrange the sample as soon as possible.

packing

 certificates.jpg 

Contact Information

Contact Information
For more information, pls contact with Ms monica at any time

Mobile:
86-0755-18948315814
86-0755-89212386



在线询价

至:
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Liquid Silicone Rubber for Cement stone molds
Liquid Silicone Rubber for Cement stone molds Product Description artificial stone molds Description HY-640 is a kind of room temperature vulcanized silicone rubber in condensation type....
竞争力的价格白色硅胶鞋底出售
竞争力的价格白色硅胶鞋底出售 描述 HY-E630是一种双组份硅橡胶,以1:1或10:1的混合比例加成固化或铂固化型。 它可以在室温和热下固化。 它是一种食品级有机硅,主要用于模具制造。 应用 HY-E630硅橡胶主要用于制造混凝土石材,GRC,聚氨酯制品模具; 蜡烛,蜡烛装饰; 快速原型和轮胎模具; 巧克力,糖果和类似产品。
rtv硅橡胶模具硅胶雕塑
rtv硅橡胶模具硅胶雕塑 描述 HY-E600是一种双组份硅橡胶,以1:1或10:1的混合比例加成固化或铂固化型。 它可以在室温和热下固化。 它是一种食品级有机硅,主要用于模具制造。 应用 HY-E600硅橡胶主要用于制造混凝土石材,GRC,聚氨酯产品模具; 蜡烛,蜡烛装饰; 快速原型和轮胎模具; 巧克力,糖果和类似产品。
condesation silicone rubber for toys & soap &crafts
condesation silicone rubber for toys & soap &crafts Product Description   Description HY-610 is a kind of room temperature vulcanized silicone rubber in condensation type. It&...
Medical Grade Silicone for shoe insoles great tear strength free sample
Medical Grade Silicone for shoe insoles great tear strength free sample Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Hongye silicon rubber Model Number: E608 Medical Grade...
供应产品

Same products

There is premium and professional motion sensor speaker
There is premium and professional motion sensor speaker 卖方:    Shenzhen Waytronic Electronics Co., Ltd.is a company with Approved motion activ...
PIPE AND DRAPEUnmatched Aluminum truss manufacturers,indust
PIPE AND DRAPEUnmatched Aluminum truss manufacturers,indust 卖方:     Royal Kay Performance Equipment is a professional company inLayher Scaffold...
alibaba hot sale type silica brick for glass furnace
alibaba hot sale type silica brick for glass furnace 卖方: 郑州天阳耐火材料有限公司 Product Description   ith dense and smooth appearance, uniform corner and edge, pure col...
alibaba hot sale type silica brick for glass furnace
alibaba hot sale type silica brick for glass furnace 卖方: 郑州天阳耐火材料有限公司 Product Description   ith dense and smooth appearance, uniform corner and edge, pure col...
CT  M75-14ICD  M25R-14ICD
CT M75-14ICD M25R-14ICD 卖方: Contact:Jessica Email:sales3@amikon.cn Skype:jessica01235483 Mobile Phone:86-18030235311(WhatsApp...