工具

AAK hydraulic valve blocks used in deep sea, although the price is 20% more expensive, the service life is 2 times that of the peers
AAK hydraulic valve blocks used in deep sea, although the price is 20% more expensive, the service life is 2 times that of the peers 卖方: AAK INDUSTRY CO., LTD Bartolomeo is from Italy, and their company has developed a hydraulic drill used in the deep sea....
0.2cc/min AAK Hydraulic Needle Valve, with Internal Leakage Accuracy 20% Higher than that of HydraForce
0.2cc/min AAK Hydraulic Needle Valve, with Internal Leakage Accuracy 20% Higher than that of HydraForce 卖方: AAK INDUSTRY CO., LTD Sal is from Italy. He has been buying hydraulic cartridge valves in China for quite a long time a...
The 1 million times durability of hydraulic counterbalance valves, AAK quality benchmarked with SUN hydraulics, but the price was 30% cheaper
The 1 million times durability of hydraulic counterbalance valves, AAK quality benchmarked with SUN hydraulics, but the price was 30% cheaper 卖方: AAK INDUSTRY CO., LTD Last week, the German customer Thorsten sent an order for 1,200 hydraulic counterbalance valves, ...
The lifetime of AAK hydraulic flow control valve is twice as long as that of the peer, and AAK finished it in 50% of the time of the peer
The lifetime of AAK hydraulic flow control valve is twice as long as that of the peer, and AAK finished it in 50% of the time of the peer 卖方: AAK INDUSTRY CO., LTD At the end of last year, Stefan from Italy sent an email asking whether 50 non-standard hydraulic...
For the hydraulic relief valves with an angle error of 0.06 °, AAK innovated the processing of inner cone 3 years ago
For the hydraulic relief valves with an angle error of 0.06 °, AAK innovated the processing of inner cone 3 years ago 卖方: AAK INDUSTRY CO., LTD Fischer comes from a Spanish hydraulic equipment manufacturing company and is an experienced purc...
Original factory can’t solve failure of the pressure spring of hydraulic relief valves under high temperature. AAK can withstand 500℃
Original factory can’t solve failure of the pressure spring of hydraulic relief valves under high temperature. AAK can withstand 500℃ 卖方: AAK INDUSTRY CO., LTD Maverick is from a Canadian hydraulic equipment manufacturing company. In the first half of last ...
Many hydraulic valve manufacturers can't make hydraulic relief valves with a fixed length diameter ratio of 11:1, AAK solved it with 3 points
Many hydraulic valve manufacturers can't make hydraulic relief valves with a fixed length diameter ratio of 11:1, AAK solved it with 3 points 卖方: AAK INDUSTRY CO., LTD The processing difficulty ofhydraulic relief valveswith deep hole is a pain point in the industry...
The sensitivity of AAK hydraulic pressure control valve is over 30% higher than that of the original manufacturer, the unsalable equipment sells hot
The sensitivity of AAK hydraulic pressure control valve is over 30% higher than that of the original manufacturer, the unsalable equipment sells hot 卖方: AAK INDUSTRY CO., LTD 2 months ago, Jackson from the United States left a message on AAK website: I read the article "T...
90% людей не знают гидравлических клапанов. Как ак продержится 13 лет?
90% людей не знают гидравлических клапанов. Как ак продержится 13 лет? 卖方: AAK INDUSTRY CO., LTD To be sure, there are many small and medium-sized factories with their own proprietary technologi...
AAK hydraulic relief valves won the PK from more than 30 hydraulic valve manufacturers by using 3 points for quality positioning
AAK hydraulic relief valves won the PK from more than 30 hydraulic valve manufacturers by using 3 points for quality positioning 卖方: AAK INDUSTRY CO., LTD Madison is from WHITEcompany inthe United States. 1year ago, he found AAKHydraulic Valvesthrough ...
The original hydraulic valve manufacturer cannot meet the accuracy of valve hole 1.0μm for hydraulic flow control valves, AAK achieved 0.8μm
The original hydraulic valve manufacturer cannot meet the accuracy of valve hole 1.0μm for hydraulic flow control valves, AAK achieved 0.8μm 卖方: AAK INDUSTRY CO., LTD In March this year, Danielisadora, a Brazilian customer, sent us an inquiry, urgently needing 20 ...
For Hydraulic Needle Valves with big aperture and accuracy below 1.0μm, AAK replaced the Greek hydraulic cartridge valve manufacturers
For Hydraulic Needle Valves with big aperture and accuracy below 1.0μm, AAK replaced the Greek hydraulic cartridge valve manufacturers 卖方: AAK INDUSTRY CO., LTD Last Friday, we received an annual order of 3,600 hydraulic needle valves from Paschalis, probabl...
For the Hydraulic relief valves within 2μm hole accuracy, only AAK 100% met the requirements
For the Hydraulic relief valves within 2μm hole accuracy, only AAK 100% met the requirements 卖方: AAK INDUSTRY CO., LTD At the beginning of this year, Timoteo emailed us to asked about the production time for 600 hydr...
The other hydraulic valve manufacturers can not avoid the deformation of the hydraulic relief valve hole, While AAK had the skill to solve it 3 years ago
The other hydraulic valve manufacturers can not avoid the deformation of the hydraulic relief valve hole, While AAK had the skill to solve it 3 years ago 卖方: AAK INDUSTRY CO., LTD James, a Brazilian customer, was in urgent need of purchasing 200 hydraulic relief valves within ...
调压阀组
调压阀组 卖方: 河南上阀阀门股份有限公司 由ZAJW-1型自动调节蝶阀及常通管组成。在使用中一般用一台ZAJW-1型自动调节蝶DDZ型电动单元组合仪表进行自动控制,其余二台(或三台)ZAJW-1型自动调节蝶阀由阀门配置的DKJ电动执行器...
快速切断阀
快速切断阀 卖方: 河南上阀阀门股份有限公司 快速切断阀采用三偏心金属密闭蝶阀结构形式,快切装置采用弹簧快切关闭、油缸复位结构。在现场控制箱上设有转换开关,用来选择就地操作或计算机远程控制。 快速切断阀油缸有水平、斜置等多种设计方式,可根据...
旁通快开阀
旁通快开阀 卖方: 河南上阀阀门股份有限公司 旁通快开阀采用三偏心金属密闭蝶阀结构形式,驱动方式采用液压伺服机构(可提供独立液压控制单元), 与快速切断阀配合使用,在TRT系统出现异常时保证高炉系统正常生产。 公称通径:DN500-1200...
For the 1.5T hydraulic valve blocks, AAK benchmarked with American manufacturer, but the price was 30% cheaper
For the 1.5T hydraulic valve blocks, AAK benchmarked with American manufacturer, but the price was 30% cheaper 卖方: AAK INDUSTRY CO., LTD Last week, the Spanish customer Salvador sent an inquiry for a hydraulic valve block, which was t...
AAK uses 3 points to promote the content of hydraulic valves and transmit 3 values. American customer learns from it
AAK uses 3 points to promote the content of hydraulic valves and transmit 3 values. American customer learns from it 卖方: AAK INDUSTRY CO., LTD Tim, from the United States, is a hydraulic valve customer that AAKhas cooperated with for 5years...
Z字型电动螺丝刀
Z字型电动螺丝刀 卖方: 殷信自动化机械(上海)有限公司 特点: 1) 这款Z字型迷你小扭力电动螺丝刀配有瑞士航太极无刷马达、无尘、无火花溢出。 2) 软式启动和低惯性最大限度降低螺丝松动可能性。 3) 螺丝刀最大直径Ø34mm,总...
美之岚新款全自动下压式气动螺丝刀
美之岚新款全自动下压式气动螺丝刀 卖方: 殷信自动化机械(上海)有限公司 特点: 1) 采用新一代壁虎式橡胶握柄,寿命长,手感舒适,外观更加美观。 2) 扭力输出范围大,且可调整,最小扭力输出为0.5kgf.cm²,最大扭力输出为280kgf.cm²...
美之岚新款全自动杠杆式气动螺丝刀
美之岚新款全自动杠杆式气动螺丝刀 卖方: 殷信自动化机械(上海)有限公司 特点: 1) 采用新一代壁虎式橡胶握柄,寿命长,手感舒适,外观更加美观。 2) 扭力输出范围大,且可调整,最小扭力输出为0.5kgf.cm²,最大扭力输出为280kgf.cm²...
AAK hydraulic relief valve with 6 samples in 3 months turned Jose's abortion order into a big one
AAK hydraulic relief valve with 6 samples in 3 months turned Jose's abortion order into a big one 卖方: AAK INDUSTRY CO., LTD Jose comes from a hydraulic equipment manufacturing company in Brazil and has been purchasing for...
AAK hydraulic flow control valves were still normal after being used for 15 months near the sea, while that of the peers corroded after 10 months
AAK hydraulic flow control valves were still normal after being used for 15 months near the sea, while that of the peers corroded after 10 months 卖方: AAK INDUSTRY CO., LTD Miguel is from a hydraulic equipment company in Brazil. He began to purchase hydraulic components...
AAK hydraulic counterbalance valve is equipped with triple safety protection, Achilleus will no longer worry about accidents
AAK hydraulic counterbalance valve is equipped with triple safety protection, Achilleus will no longer worry about accidents 卖方: AAK INDUSTRY CO., LTD Achilleus is from Greece. In the second half of last year, a high-pressure hydraulic winch sold b...
AAK hydraulic valve block socket with no deviation, Kuplin doesn't want to find any other manufacturers
AAK hydraulic valve block socket with no deviation, Kuplin doesn't want to find any other manufacturers 卖方: AAK INDUSTRY CO., LTD Kuplin is from a Russian hydraulic equipment manufacturing company, he has purchased hydraulic va...