Ali Area电子元器件is worthy of your trust

供应商:

供应产品

   Shenzhen Jie Du State Technology Co., Ltd.is a PCB prototype,pcb fabricationx19b6516nin one large multi-functional integrated modern enterprise,and devote the high-quality PCB Assembly and first-class service for the masses of customers.

   

Shenzhen Jie Du State Technology Co., Ltd. is specialized in Industry and agriculture,Electronic Component,PCB circuit board since established in 10 years ago.So far,our company has established its branch companies in major cities throughout the country.Formed in Guangdong Province,Shenzhen City,Futian district,Futian Road, Futian District, Shenzhen, China as the center, the radiation sales system and service network.Details:
PCB Assembly Manufacturer

Printed circuit board design is based on the circuit schematic, to achieve the circuit designer needs. Printed circuit board design mainly refers to the layout design, need to consider the layout of external connections. Optimization of internal electronic components. Optimized layout of metal connections and vias. Electromagnetic protection. Heat dissipation and other factors. Excellent layout design can save production costs, achieve good circuit performance and thermal performance. Simple layout design can be done manually, and complex layout designs need to be implemented with computer aided design (CAD).

In high-speed designs, the characteristic impedance of the controllable resistors and lines is one of the most important and common problems. First, look at the definition of the transmission line: the transmission line consists of two conductors with a certain length, one conductor used to send the signal, the other used to receive the signal (remember "loop" to replace the "ground" concept). In a multilayer board, each line is part of the transmission line, and the adjacent reference plane can be used as a second line or loop. The key to becoming a "good performance" transmission line is to keep its characteristic impedance constant throughout the line. [1]

The key to making the board a "controllable impedance plate" is to make the characteristic impedance of all lines meet a specified value, usually between 25 ohms and 70 ohms. In multilayer circuit boards, the key to good transmission line performance is to keep its characteristic impedance constant across the entire line.

But what exactly is the characteristic impedance? The easiest way to understand the characteristic impedance is to see what the signal is in the transmission. This is similar to the microwave transmission shown in Figure 1 when moving along a transmission line with the same cross-section. Assuming that a 1 volt voltage step wave is applied to this transmission line, such as a 1 volt battery connected to the front end of the transmission line (which is located between the transmission line and the circuit), once connected, the voltage wave signal along the line to the speed of light Spread, its speed is usually about 6 inches / nanosecond. Of course, this signal is indeed the voltage difference between the transmission line and the loop, which can be measured from any point of the transmission line and the adjacent point of the loop. Figure 2 is a schematic representation of the transmission of the voltage signal.

Zen's method is to "generate a signal" and then spread along the transmission line at a speed of 6 inches / nanosecond. The first 0.01 nanosecond forward 0.06 inches, then send the line there are excess positive charge, and the circuit has excess negative charge, it is these two kinds of charge difference between the two conductors to maintain the voltage difference between 1 volt, And these two conductors and formed a capacitor.

In the next 0.01 nanoseconds, it is necessary to adjust the voltage of a 0.06-inch transmission line from 0 to 1 volt, which must add some positive charge to the transmission line and add some negative charge to the receiving line. For each move of 0.06 inches, more positive charge must be added to the sending line, and more negative charge is added to the loop. Every 0.01 nanoseconds, the other part of the transmission line must be charged, and then the signal begins to propagate along this segment. The battery from the front end of the transmission line, when moving along this line, charges the continuous portion of the transmission line so that a voltage difference of 1 volt is formed between the transmission line and the circuit. A constant charge (± Q) from the battery is given a constant current (± Q) for a constant time interval (± t). The negative current flowing into the circuit is actually equal to the positive current flowing out, and at the front end of the signal wave, the AC current flows through the upper and lower lines to complete the entire cycle.




   Adhering to the "dedication, hardworking and thrifty, struggle, innovation" spirit of enterprise, Jieduo state technologybases on long-term development, technology as the core, market-oriented, and constantly open up new areas, undertaking to provide fast, high-quality ser



在线询价

至:
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Shenzhen Jie Du State Technology Co., Ltd.,an expert ofChin
Shenzhen Jie Du State Technology Co., Ltd.,an expert ofChin    Shenzhen Jie Du State Technology Co., Ltd. is a professional company inChina PCB prototypex19b6516n,Custom PCB. Since its incepti...
PCB Prototype Factory choose Jieduo state technology电子元
PCB Prototype Factory choose Jieduo state technology电子元    Shenzhen Jie Du State Technology Co., Ltd.located in Guangdong Province,Shenzhen City,Futian district,Futian Road, Futian Distric...
电子元器件Affordable PCB Assembly Manufacturer
电子元器件Affordable PCB Assembly Manufacturer    Shenzhen Jie Du State Technology Co., Ltd.is a PCB manufacturer,custom PCB assemblyin one large multi-functional integrated moder...
Zunyi City电子元器件is worthy of your trust
Zunyi City电子元器件is worthy of your trust     Shenzhen Jie Du State Technology Co., Ltd.is a PCB prototype,PCB Manufacturingx19b6516nin one large multi-functional integrat...
PCB Onlinewhich is beter in china,know and choose Jieduo s    Shenzhen Jie Du State Technology Co., Ltd. focus onPCB Onlinex19b6516n,PCB Assembly Manufacturer,China PCB manufacturer,PCB Proto...
供应产品

Same products

automatic nozzle Injector Nozzle DLLA150P77 093400-5770/ 0 433 171 077 for TOYOTA LAND CRUISER 4.2 TD
automatic nozzle Injector Nozzle DLLA150P77 093400-5770/ 0 433 171 077 for TOYOTA LAND CRUISER 4.2 TD 卖方: 中路通配件厂 automatic nozzle Injector Nozzle DLLA150P77 093400-5770/ 0 433 171 077 for TOYOTA LAND CRUISER 4....
audi tdi diesel fuel nozzle 093400-5500 Dlla160p50 for MITSUBISHI 4D32,4D33,4D31 5*0.29*160
audi tdi diesel fuel nozzle 093400-5500 Dlla160p50 for MITSUBISHI 4D32,4D33,4D31 5*0.29*160 卖方: 中路通配件厂 audi tdi diesel fuel nozzle 093400-5500 Dlla160p50 for MITSUBISHI 4D32,4D33,4D31 5*0.29*160  ...
audi fuel nozzle 093400-5500 Dlla160p50 for MITSUBISHI 4D32,4D33,4D31 5*0.29*160
audi fuel nozzle 093400-5500 Dlla160p50 for MITSUBISHI 4D32,4D33,4D31 5*0.29*160 卖方: 中路通配件厂 audi fuel nozzle 093400-5500 Dlla160p50 for MITSUBISHI 4D32,4D33,4D31 5*0.29*160 China Lutong Par...
audi diesel fuel nozzle 105000-1740 for Audi, Isuzu, VW,Kia,Asia
audi diesel fuel nozzle 105000-1740 for Audi, Isuzu, VW,Kia,Asia 卖方: 中路通配件厂 audi diesel fuel nozzle 105000-1740 for Audi, Isuzu, VW,Kia,Asia China Lutong Parts Plant is a pr...
Frequency UHF Metal Tag.
Frequency UHF Metal Tag. 卖方: Integrating RFID as an intelligent solution - for supply management of production stations and ma...