.

FOXBORO P0926QS



Characterization

PLC function instruction end high - voltage inverter PID closed-loop control

The requirements of closed-loop control of frequency converter put forward by users on site are as follows: frequency converter can automatically adjust the speed of frequency conversion pump according to the change of water consumption of the user system, ending the constant pressure water supply of pipe network;Together with the LCD can be set pressure target value.

According to the user's requirements, the PLC is equipped with special modules fx2n-4ad and fx2n-2da.Fx2n-4ad is an imitation input module with four input channels and a maximum resolution of 12 bits. The imitation input is planned to be -10v ~ 10V or 4 ~ 20mA.Fx2n-2da is a simulated output module, with 2 output channels and a maximum resolution of 12 bits. The output value of the simulated value is planned as -10v to 10V and maybe 4 to 20 mA.In this way, through reading instructions (FROM) and writing instructions (TO), as well as PID closed-loop control function instructions carried by PLC, it can end the PID closed-loop control of pipe network water pressure at the user's site.

The detailed programming process is as follows :PLC reading instruction (FROM) reads the response value of the user's water pressure, and the response value is stored in the D12 data address of the PID instruction with the moving instruction (MOV);The user's water pressure setting value is stored in the D10 data address in the PID command with the move command (MOV);D200 ~ D222 saves working parameters of PID;D14 is the operation value output of PID instruction. The PID closed-loop operation result D14 is written into the simulated output module through the writing instruction (TO) of PLC, and then converted into the simulated signal of -10v ~ 10V or 4 ~ 20mA into the high-voltage inverter controller for frequency setting.

The water supply network of the sewage treatment plant of pangang is huge, and the water pressure of the pipe network is slow to change the speed of the pump. Therefore, the calculation speed of PID should not be too fast, that is, the proportional dispatching should not be too fast. Otherwise, if the water pressure of the pipe network is suddenly changed too much, the frequency converter's dispatching simply constitutes a long time of vibration.According to this situation, as shown in figure 3, you can participate in the PLC control program PID distance accounting time (T0) and PID operation dead zone (M0), so that the PID accounting speed scheduling can be consistent with the pipe pressure change speed, to avoid the pipe pressure shock.

Conclusion

High voltage frequency converter bypass cabinet bypass logic control with PLC to automatically through work in pangang's sewage treatment plant of light high voltage frequency converter to simulate fault description, high voltage inverter automatic bypass cabinet in the transfer from variable frequency power frequency, frequency shift frequency of mutual switch is very convenient, can end within 10 s, greatly advance the reliability of the pump.The field PID closed-loop control effect is very ambitious, the water pressure is not firm very small, not firm beyond 0.1kg, frequency converter can sensitive regulation speed, the water pressure control in the setting and planning, the regulation speed will not occur any vibration.Through the serial port rs-232 communication between PLC and the controller of high voltage inverter, the system pipe pressure and various state quantities of PLC can be supervised on the LCD screen of high voltage inverter.

Packing and delivery items

Packing:Brand new and original in box

Lead time:2-3 days against the payment

Terms of payment:Telegram transfer

Warranty:1 year

Minimum order:1

Products customers also like to search

6ES5101-8UU43 6NG4212-8PA01-0AA4 SED4D-01
6ES5102-8MA01 6NG4212-8PA02-3CD0 SDV531-S23
6ES5102-8MA02 6NG4212-8PA01-1AA0 AAI143-S00/k4a00
6ES5102-8MA12 6NG4212-8PA02-7CD1 ALR111-S01
6ES5103-8MA01 6NG4212-8PA02-7CE1 S9400UK S9129FA
6ES5103-8MA02 6NG4212-8PA01-0AA3 ASD533
190-CPS40 6NG4212-8PA02-7CB0 AAV144-S00
190E-AND2-CB40S 6NG4212-8PA01-1AC0 EB501
6NG4212-8PA01-1AD0 ADV851 190e-and2-cb40c-ky-r
6NG4212-8PA01-1AE0 AMM12C 190E-MNZ242-CB40s
6NG4212-8PA01-1BB5 AMN51 190S-ANDJ1-CB40C





在线联系供应商

至: Cambia Automation Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

1771-OFE3	Malaysia
1771-OFE3 Malaysia Rockwell automation :Allen-Bradley Allen-Bradley is the brand-name of a line of factory automation equipment, today owned by Rockwell Automation. T...
07KR264 ABB
07KR264 ABB The best motion control technology ABB has the best motion control algorithm and motion control system in the industry. The core of the robot is...
We take what’s possible and make it a reality. That’s what drives us, because automation is a catalyst for evolving our world. It makes...
1756-HSC	ALLEN BRADLEY
1756-HSC ALLEN BRADLEY Allen-Bradley 1746-HS Original Package Condition: brand new Price :On Demand Quantity :1 Standards & Approvals :CCC Payment Terms Expecte...
IC620ACC001	plc parts
IC620ACC001 plc parts Powering forward GE Power creates the energy technologies of the future and improves the power networks that we depend on today. We create a thir...
供应产品

Same products

YTO-X804 tractor
YTO-X804 tractor 卖方: Luoyang Roader machinery equipment Co., Ltd. YTO-X804 TRACTOR FEATURES1).The diesel engine, which is manufactured using advanced British techn...
YTO-X1204 tractor
YTO-X1204 tractor 卖方: Luoyang Roader machinery equipment Co., Ltd. YTO-X1204 TRACTOR FEATURES 1).The transmission system, which is manufactured using advanced Itali...
YTO-404 TRACTOR
YTO-404 TRACTOR 卖方: Luoyang Roader machinery equipment Co., Ltd. YTO-404 TRACTOR FEATURES 1).YTO engine delivers high fuel efficiency, generates low emissions, an...
Modular Design IP67 Flood Light Manufacturers
Modular Design IP67 Flood Light Manufacturers 卖方: Zhejiang Changlux lighting Co., Ltd Zhejiang Changlux lighting Co., Ltd., was established in 2002. High-tech China Modular Design IP6...
Industrial Molding Parts
Industrial Molding Parts 卖方: HANKING MOULD ENGINEERING LTD. Injection molded parts Part size: 124*152*80mmPart material: ASACavity: 2 cavitiesMould weight: 8...